Помогите с настройкой!!!

Технические вопросы по UTM 5.0
Ответить
masich
Сообщения: 19
Зарегистрирован: Сб ноя 22, 2008 02:47

Помогите с настройкой!!!

Сообщение masich »

Поставил utm-5.1.10-017 + red hat 9
Проблемы с настрайкой!

1.При подключении по впн нету интернета, Не могу понять в добавлении правил.

2.При добавлении пользователя или добавлении денег на счет существующему пользователю, нету впн. После перезагрузки сервера впн подключаеться.

Вот мои конфиги радиуса

##
## /netup/utm5/radius5.cfg
## Конфигурационный файл RADIUS-сервера UTM5
##

## ================================================================================
## ДОСТУП К ЯДРУ
## ================================================================================

## core_host
## Описание: Адрес хоста, на котором запущено ядро биллинговой системы.
## Возможные значения: IP-адрес
## Значение по умолчанию: 127.0.0.1
core_host=127.0.0.1

##
## Описание: Порт, на котором запущено ядро биллинговой системы.
## Значение по умолчанию:11758
core_port=11758

## radius_login
## Описание: Логин системного пользователя в биллинговой системе.
## Значение по умолчанию: radius
radius_login=radius

## radius_password
## Описание: Пароль системного пользователя в биллинговой системе.
## Значение по умолчанию: radius
radius_password=radius

## radius_ssl_type
## Описание: Тип безопасного соединения SSL.
## Возможные значения: tls1, ssl3, none
## Значение по умолчанию: ssl3
radius_ssl_type=none

## ================================================================================
## ПОРТЫ И ИНТЕРФЕЙСЫ
## ================================================================================

## radius_auth_host
## Описание: IP-адрес узла для приема пакетов Access.
## Возможные значения: IP-адрес.
## Значение по умолчанию: 0.0.0.0
radius_auth_host=0.0.0.0

## radius_auth_port
## Описание: Порт для приема пакетов Access.
## Значение по умолчанию: 1812.
radius_auth_port=1812

## radius_acct_host
## Описание: IP-адрес узла для приёма пакетов Accounting.
## Возможные значения: IP-адрес.
## Значение по умолчанию: 0.0.0.0
radius_acct_host=0.0.0.0

## radius_acct_port
## Описание: Порт для приема пакетов Accounting.
## Значение по умолчанию: 1813
radius_acct_port=1813

radius_max_session_age=10

## ================================================================================
## АВТОРИЗАЦИЯ
## ================================================================================

## radius_auth_null
## Описание: При включении этой опции сервер RADIUS будет принимать и успешно
## авторизовать запросы без пароля в случае, если пароль пользователя пуст.
## Имеются в виду запросы без атрибута CHAP, PAP или MSCHAP авторизации.
## Возможные значения: enable, yes, on
## Значение по умолчанию: не установлено
#radius_auth_null=yes

## radius_auth_vap
## Описание: Запретить авторизоваться заблокированным пользователям.
## Возможные значения: 0, 1.
## Значение по умолчанию: 0.
radius_auth_vap=1

## radius_auth_mppe
## Описание: Разрешить MPPE 128 бит при авторизации по протоколу MS-CHAP-v2.
## Возможные значения: enable, yes, on
## Значение по умолчанию: не установлено
#radius_auth_mppe=yes

## radius_card_autoadd
## Описание: Опция разрешает проводить автоматическую регистрацию пользователей
## через сервер RADIUS по предоплаченной интернет-карте.
## Возможные значения: enable, yes, on
## Значение по умолчанию: не установлено
#radius_card_autoadd=yes

## ================================================================================
## ТИПЫ ПОРТОВ
## ================================================================================

## radius_nas_port_vpn
## Описание: Указанный в данном поле тип порта будет использоваться при
## подключении по VPN. В случае если при авторизации по услуге VPN будет передан
## другой тип порта, то радиус-сервер откажет в авторизации. Данная опция
## применяется для предотвращения подключения пользователей коммутируемого
## доступа по VPN.
## Можно указать несколько параметров.
## Значение по умолчанию: не установлено
#radius_nas_port_vpn=5

## radius_nas_port_dialup
## Описание: Аналогично для коммутируемого доступа.
## Значение по умолчанию: не установлено
#radius_nas_port_dialup=0
#radius_nas_port_dialup=1

## radius_nas_port_tel
## Описание: Аналогично для услуги «Телефония».
## Значение по умолчанию: не установлено
#radius_nas_port_tel=5

## ================================================================================
## ТАЙМАУТЫ
## ================================================================================

## radius_ippool_acct_timeout
## Описание: Время в секундах, на которое происходит блокирование IP-адресов
## в пуле после отправки пакета Access-Accept. Если в течение этого времени
## не пришел пакет Accounting-start, то IP-адрес снова считается свободным
## и может быть выдан при следующей успешной авторизации.
## Значение по умолчанию: 30
radius_ippool_acct_timeout=5

## radius_ippool_timeout
## Описание: Время в секундах, на которое происходит блокирование IP-адресов в пуле
## после прихода пакета Accounting-Start.
## Значение по умолчанию: адреса блокируются до прихода пакета Accounting-Stop
radius_ippool_timeout=5

## ================================================================================
## ПАРАМЕТРЫ IP-ТЕЛЕФОРИИ
## ================================================================================

## radius_auth_h323_remote_address
## Описание: При включении данной опции есть возможность авторизоваться не
## по атрибуту user-name, а по значению VSA атрибута от Cisco:
## h323-remote-address, которое содержит в себе IP-адрес клиента, инициировавшего
## сессию. При приёме запроса с данным атрибутом сервер RADIUS использует его
## значение (IP-адрес в формате x.x.x.x) в качестве логина, т. е. для успешной
## авторизации должна присутствовать связка услуги IP-телефонии, в которой в поле
## логина указан IP-адрес клиента (в формате x.x.x.x)
## Возможные значения: enable, yes, on
## Значение по умолчанию: не установлено
#radius_auth_h323_remote_address=yes

## radius_acct_rewrite_login_originate
## Описание: При включении параметра сервер RADIUS использует в качестве логина
## значение h323_remote_address в том случае, если в принятом пакете значение
## атрибута h323-call-origin равно «originate».
## Возможные значения: enable, yes, on
## Значение по умолчанию: не установлено

## radius_acct_rewrite_login_answer
## Описание: При включении параметра сервер RADIUS использует в качестве логина
## значение h323_remote_address в том случае, если в принятом пакете значение
## атрибута h323-call-origin равно «originate».
## Возможные значения: enable, yes, on
## Значение по умолчанию: не установлено

## h323_origin_reject
## Описание: Не тарифицировать звонок, если атрибут h323-call-origin имеет
## указанное значение.
## Возможные значения: originate, answer, callback, ...
## Значение по умолчанию: не установлено
#h323_origin_reject=originate

## ================================================================================
## ПРОТОКОЛИРОВАНИЕ
## ================================================================================

## log_level
## Описание: Уровень протоколирования ядра.
## Возможные значения: 0, 1, 2, 3
## Значение по умолчанию: 1
log_level=3

## log_file_main
## Описание: Файл записи журнала уровня информации, замечаний, предупреждений, ошибок.
## Возможные значения: имя файла
## Значение по умолчанию: стандартный поток вывода
log_file_main=/netup/utm5/log/radius_main.log


## log_file_debug
## Описание: Файл записи журнала отладочного уровня.
## Возможные значения: имя файла
## Значение по умолчанию: стандартный поток вывода
log_file_debug=/netup/utm5/log/radius_main.log

## log_file_critical
## Описание: Файл записи журнала уровня критических ошибок и сбоев.
## Возможные значения: имя файла
## Значение по умолчанию: стандартный поток вывода
log_file_critical=/netup/utm5/log/radius.log

Конфиг утм5

##
## /netup/utm5/utm5.cfg
## Main UTM5 configuration file
##

## ================================================================================
## DATABASE
## ================================================================================

## database_type
## Description: Database type.
## Possible values: mysql, postgres.
## Required field.
database_type=mysql

## database
## Description: Database name.
## Required field.
database=UTM5

## database_host
## Description: Database server IP/hostname.
## Default value: localhost
database_host=127.0.0.1

## database_login
## Description: Database username.
## Default value: User starting utm5_core.
database_login=root

## database_password
## Description: Database password.
## Default value: <empty>
database_password=

## database_sock_path
## Description: Path to database socket file. Used if database_type is set to "mysql" and
## database_host is unset or set to "localhost".
## Default value: /tmp/mysql.sock
database_sock_path=/tmp/mysql.sock

## database_port
## Description: Database server port.
## Used if database_type is set to "mysql"
## Default value: 3306
database_port=3306


## dbcount
## Description: Number of database connections.
##
## Default value: 6
#dbcount=6

## db_transaction_enable
## Description: Enables transaction support (EXPERIMENTAL!)
## Possible values: yes, on, true
## Default value: unset.

## database_reconnect_count
## Description: Number of connection retries.
## Default value: 5
#database_reconnect_count=5

## database_reconnect_sleep
## Description: Reconnect timeout.
## Default value: 2
#database_reconnect_sleep=2

## ================================================================================
## URFA SERVER
## ================================================================================

## urfa_bind_host
## Description: Listening IP.
## Possible values: IP address.
## Default value: disabled.
urfa_bind_host=0.0.0.0


## urfa_bind_port
## Description: Listening port.
## Default value: 11758


## urfa_lib_file
## Description: Dynamic modules that will be loaded at system start-up.
## Possible values: Both absolute and relative paths may be used.
## Default value: <empty>
urfa_lib_file=/netup/utm5/lib/utm5_core/liburfa-utils.so
urfa_lib_file=/netup/utm5/lib/utm5_core/liburfa-std.so
urfa_lib_file=/netup/utm5/lib/utm5_core/liburfa-card.so
urfa_lib_file=/netup/utm5/lib/utm5_core/liburfa-graph.so
urfa_lib_file=/netup/utm5/lib/utm5_radius/liburfa-radius.so
urfa_lib_file=/netup/utm5/lib/utm5_hotspot/liburfa-hotspot.so

## ================================================================================
## NETFLOW BUFFER
## ================================================================================

## nfbuffer_host
## Description: Listening IP
## Possible values: IP address
## Default value: 0.0.0.0
nfbuffer_host=0.0.0.0

## nfbuffer_port
## Description: Listening port.
## Default value: 9997
nfbuffer_port=9996

## ================================================================================
## LOGGING
## ================================================================================

## log_level
## Description: Log level.
## Possible values: 0, 1, 2, 3
## Default value: 1
log_level=3

## log_file_main
## Description: Main logfile path.
## Possible values: filename
## Default value: STDOUT
log_file_main=/netup/utm5/log/main.log


## log_file_debug
## Description: Debug logfile path.
## Possible values: filename
## Default value: STDOUT
log_file_debug=/netup/utm5/log/debug.log

## log_file_critical
## Description: Critical logfile path.
## Possible values: filename
## Default value: STDOUT
#log_file_critical=/netup/utm5/log/main.log

## log_file_verificator
## Description: Database verificator logfile path.
## Possible values: filename
## Default value: /netup/utm5/log/verificator.sql
log_file_verificator=/netup/utm5/log/verificator.log

## ================================================================================
## LDAP
## ================================================================================

## ldap_enable
## Description: Enable LDAP support.
## Possible values: yes
## Default value: disabled
#ldap_enable=yes

## ldap_host
## Description: LDAP sever IP/hostname
## Possible values: IP address or hostname
## Default value: 127.0.0.1
#ldap_host=127.0.0.1

## ldap_port
## Description: LDAP server port
## Default value: 389
#ldap_port=389

## ldap_login
## Description: LDAP server username
## Default value: <empty>
#ldap_login=cn=Manager,dc=example,dc=ru

## ldap_password
## Description: LDAP server password
## Default value: <empty>
#ldap_password=secret

## ldap_base_dn
## Description: LDAP base DN
## Default value: <empty>
#ldap_base_dn=dc=example,dc=ru

## ldap_ping_timeout
## Description: LDAP connection check timeout
## Default value: 60
#ldap_ping_timeout=60

## ================================================================================
## MISC SETTINGS
## ================================================================================

## core_pid_file
## Description: Path to PID file
## Possible values: filename
## Default value: /var/run/utm5_core.pid
#core_pid_file=/var/run/utm5_core.pid

вот мои логи rudius_main

Info : Apr 28 12:48:40 UTM5 Logger: New ` Info : ' stream: /netup/utm5/log/radius_main.log
Info : Apr 28 12:48:40 UTM5 Logger: New `?Debug : ' stream: /netup/utm5/log/radius_main.log
Info : Apr 28 12:48:40 UTM5 Logger: New `?Debug : ' stream: /netup/utm5/log/radius_main.log
Notice: Apr 28 12:48:40 RADIUS Config: SSL is disabled. All data is transmitted to/from utm5_core unencrypted!
Notice: Apr 28 12:48:40 RADIUS Config: SSL is disabled. All data is transmitted to/from utm5_core unencrypted!
Info : Apr 28 12:48:40 RADIUS URFA[upload]: Worker thread created
Info : Apr 28 12:48:40 RADIUS URFA[upload]: Worker thread created
Info : Apr 28 12:48:40 RADIUS URFA[upload]: [worker]: Thread created
Info : Apr 28 12:48:40 RADIUS URFA[upload]: [worker]: Thread created
Info : Apr 28 12:48:40 RADIUS URFA[plugin]: Worker thread created
Info : Apr 28 12:48:40 RADIUS URFA[plugin]: Worker thread created
Info : Apr 28 12:48:40 RADIUS URFA[plugin]: [worker]: Thread created
Info : Apr 28 12:48:40 RADIUS URFA[plugin]: [worker]: Thread created
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: IP for IP-GroupID/A/Slink/Service: 13/1/14/2. 1 nodes
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: IP for IP-GroupID/A/Slink/Service: 14/2/16/2. 1 nodes
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: IP for IP-GroupID/A/Slink/Service: 15/3/18/2. 1 nodes
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: IP for IP-GroupID/A/Slink/Service: 17/4/22/2. 1 nodes
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: IP-traffic service <1> received
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: Vendor <0> attr <230> value size <3>
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: Vendor <0> attr <230> value size <3>
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: IP-traffic service <2> received
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
ERROR : Apr 28 12:48:40 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 28 12:48:40 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 28 12:48:40 RADIUS DBA: Inserting NAS result. Data size <0>
ERROR : Apr 28 12:48:40 RADIUS DBA: Inserting NAS result. Data size <0>
Info : Apr 28 12:48:40 NASCache<127.0.0.1>: Created...
Info : Apr 28 12:48:40 NASCache<127.0.0.1>: Created...
Info : Apr 28 12:48:40 RADIUS URFA[plugin]: NAS <127.0.0.1> added/modified
Info : Apr 28 12:48:40 RADIUS URFA[plugin]: NAS <127.0.0.1> added/modified
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
ERROR : Apr 28 12:48:40 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 28 12:48:40 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 28 12:48:40 RADIUS DBA: Inserting NAS result. Data size <0>
ERROR : Apr 28 12:48:40 RADIUS DBA: Inserting NAS result. Data size <0>
Info : Apr 28 12:48:40 NASCache<localhost>: Created...
Info : Apr 28 12:48:40 NASCache<localhost>: Created...
Info : Apr 28 12:48:40 RADIUS URFA[plugin]: NAS <localhost> added/modified
Info : Apr 28 12:48:40 RADIUS URFA[plugin]: NAS <localhost> added/modified
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: TimeRange <1>
Info : Apr 28 12:48:40 RADIUS DBA: Starting directions sort...
Info : Apr 28 12:48:40 RADIUS DBA: Starting directions sort...
Info : Apr 28 12:48:40 RADIUS DBA: Finished directions sort...
Info : Apr 28 12:48:40 RADIUS DBA: Finished directions sort...
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: Account <1> with balance <3.796>
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: Account <2> with balance <-1.204>
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: Account <3> with balance <-1.204>
?Debug : Apr 28 12:48:40 RADIUS URFA[plugin]: Account <4> with balance <0.370>
Info : Apr 28 12:48:40 RADIUS URFA[plugin]: Updating realm list
Info : Apr 28 12:48:40 RADIUS URFA[plugin]: Updating realm list
?Debug : Apr 28 12:48:40 RADIUS DBA: Flushing REALM list
?Debug : Apr 28 12:48:40 RADIUS DBA: Updating Named Pool: ip
?Debug : Apr 28 12:48:40 RADIUS DBA: New Named Pool inserted: ip
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <www> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <www> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <www> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <www> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <masich> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <masich> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <masich> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <masich> found. type <1>
?Debug : Apr 28 12:48:40 RADIUS DBA: Info for login <masich> found. type <1>
Info : Apr 28 12:49:04 UTM5 Logger: New ` Info : ' stream: /netup/utm5/log/radius_main.log
Info : Apr 28 12:49:04 UTM5 Logger: New `?Debug : ' stream: /netup/utm5/log/radius_main.log
Info : Apr 28 12:49:04 UTM5 Logger: New `?Debug : ' stream: /netup/utm5/log/radius_main.log
Notice: Apr 28 12:49:04 RADIUS Config: SSL is disabled. All data is transmitted to/from utm5_core unencrypted!
Notice: Apr 28 12:49:04 RADIUS Config: SSL is disabled. All data is transmitted to/from utm5_core unencrypted!
Info : Apr 28 12:49:04 RADIUS URFA[upload]: Worker thread created
Info : Apr 28 12:49:04 RADIUS URFA[upload]: Worker thread created
Info : Apr 28 12:49:04 RADIUS URFA[upload]: [worker]: Thread created
Info : Apr 28 12:49:04 RADIUS URFA[upload]: [worker]: Thread created
Info : Apr 28 12:49:04 RADIUS URFA[plugin]: Worker thread created
Info : Apr 28 12:49:04 RADIUS URFA[plugin]: Worker thread created
Info : Apr 28 12:49:04 RADIUS URFA[plugin]: [worker]: Thread created
Info : Apr 28 12:49:04 RADIUS URFA[plugin]: [worker]: Thread created
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: IP for IP-GroupID/A/Slink/Service: 13/1/14/2. 1 nodes
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: IP for IP-GroupID/A/Slink/Service: 14/2/16/2. 1 nodes
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: IP for IP-GroupID/A/Slink/Service: 15/3/18/2. 1 nodes
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: IP for IP-GroupID/A/Slink/Service: 17/4/22/2. 1 nodes
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: IP-traffic service <1> received
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: Vendor <0> attr <230> value size <3>
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: Vendor <0> attr <230> value size <3>
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: IP-traffic service <2> received
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
ERROR : Apr 28 12:49:04 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 28 12:49:04 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 28 12:49:04 RADIUS DBA: Inserting NAS result. Data size <0>
ERROR : Apr 28 12:49:04 RADIUS DBA: Inserting NAS result. Data size <0>
Info : Apr 28 12:49:04 NASCache<127.0.0.1>: Created...
Info : Apr 28 12:49:04 NASCache<127.0.0.1>: Created...
Info : Apr 28 12:49:04 RADIUS URFA[plugin]: NAS <127.0.0.1> added/modified
Info : Apr 28 12:49:04 RADIUS URFA[plugin]: NAS <127.0.0.1> added/modified
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
ERROR : Apr 28 12:49:04 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 28 12:49:04 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 28 12:49:04 RADIUS DBA: Inserting NAS result. Data size <0>
ERROR : Apr 28 12:49:04 RADIUS DBA: Inserting NAS result. Data size <0>
Info : Apr 28 12:49:04 NASCache<localhost>: Created...
Info : Apr 28 12:49:04 NASCache<localhost>: Created...
Info : Apr 28 12:49:04 RADIUS URFA[plugin]: NAS <localhost> added/modified
Info : Apr 28 12:49:04 RADIUS URFA[plugin]: NAS <localhost> added/modified
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: TimeRange <1>
Info : Apr 28 12:49:04 RADIUS DBA: Starting directions sort...
Info : Apr 28 12:49:04 RADIUS DBA: Starting directions sort...
Info : Apr 28 12:49:04 RADIUS DBA: Finished directions sort...
Info : Apr 28 12:49:04 RADIUS DBA: Finished directions sort...
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: Account <1> with balance <3.796>
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: Account <2> with balance <-1.204>
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: Account <3> with balance <-1.204>
?Debug : Apr 28 12:49:04 RADIUS URFA[plugin]: Account <4> with balance <0.370>
Info : Apr 28 12:49:04 RADIUS URFA[plugin]: Updating realm list
Info : Apr 28 12:49:04 RADIUS URFA[plugin]: Updating realm list
?Debug : Apr 28 12:49:04 RADIUS DBA: Flushing REALM list
?Debug : Apr 28 12:49:04 RADIUS DBA: Updating Named Pool: ip
?Debug : Apr 28 12:49:04 RADIUS DBA: New Named Pool inserted: ip
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <www> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <www> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <www> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <www> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <masich> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <masich> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <masich> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <masich> found. type <1>
?Debug : Apr 28 12:49:04 RADIUS DBA: Info for login <masich> found. type <1>
Info : Apr 28 12:49:14 UTM5 Logger: New ` Info : ' stream: /netup/utm5/log/radius_main.log
Info : Apr 28 12:49:14 UTM5 Logger: New `?Debug : ' stream: /netup/utm5/log/radius_main.log
Info : Apr 28 12:49:14 UTM5 Logger: New `?Debug : ' stream: /netup/utm5/log/radius_main.log
Notice: Apr 28 12:49:14 RADIUS Config: SSL is disabled. All data is transmitted to/from utm5_core unencrypted!
Notice: Apr 28 12:49:14 RADIUS Config: SSL is disabled. All data is transmitted to/from utm5_core unencrypted!
Info : Apr 28 12:49:14 RADIUS URFA[upload]: Worker thread created
Info : Apr 28 12:49:14 RADIUS URFA[upload]: Worker thread created
Info : Apr 28 12:49:14 RADIUS URFA[upload]: [worker]: Thread created
Info : Apr 28 12:49:14 RADIUS URFA[upload]: [worker]: Thread created
Info : Apr 28 12:49:14 RADIUS URFA[plugin]: Worker thread created
Info : Apr 28 12:49:14 RADIUS URFA[plugin]: Worker thread created
Info : Apr 28 12:49:14 RADIUS URFA[plugin]: [worker]: Thread created
Info : Apr 28 12:49:14 RADIUS URFA[plugin]: [worker]: Thread created
ERROR : Apr 28 12:49:14 RADIUS Acct: Connect failed: 98: Address already in use
ERROR : Apr 28 12:49:14 RADIUS Acct: Connect failed: 98: Address already in use
ERROR : Apr 28 12:49:14 RADIUS Auth: Connect failed: 98: Address already in use
ERROR : Apr 28 12:49:14 RADIUS Auth: Connect failed: 98: Address already in use
Notice: Apr 28 12:49:14 RADIUS Config: Pid file found: /var/run/utm5_radius.pid; Overwriting
Notice: Apr 28 12:49:14 RADIUS Config: Pid file found: /var/run/utm5_radius.pid; Overwriting
?Debug : Apr 28 12:51:14 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 28 12:51:14 RADIUS Auth: User <masich> connecting
?Debug : Apr 28 12:51:14 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 28 12:51:14 RADIUS DBA: Info for login <masich> found. type <1>
?Debug : Apr 28 12:51:14 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 28 12:51:14 RADIUS Auth: CHAP: Challenge size: 17
?Debug : Apr 28 12:51:14 RADIUS Auth: CHAP: Authorized user <masich>
?Debug : Apr 28 12:51:14 RADIUS Auth: IP claimed: 0xa800008 (<10.128.0.8>)
?Debug : Apr 28 12:51:14 RADIUS Auth: fill_radius_data Vendor:<0> Attr:<230> Val:<135759376> Size<3>
?Debug : Apr 28 12:51:14 RADIUS Auth: fill_radius_data result <0> error <Success>
?Debug : Apr 28 12:51:14 RADIUS Auth: fill_radius_data verifying packet. fetched val <512> size:<3>
?Debug : Apr 28 12:51:14 RADIUS Auth: fill_radius_data Vendor:<0> Attr:<230> Val:<135759384> Size<3>
?Debug : Apr 28 12:51:14 RADIUS Auth: fill_radius_data result <0> error <Success>
?Debug : Apr 28 12:51:14 RADIUS Auth: fill_radius_data verifying packet. fetched val <512> size:<3>
?Debug : Apr 28 12:51:14 RADIUS Auth: Calling fill radius attributes for NAS. Attr storage size <0>
?Debug : Apr 28 12:51:14 RADIUS Acct: Acct packet with session ID: 49F6D19212BD00
?Debug : Apr 28 12:51:14 RADIUS Acct: Acct-Start packet
?Debug : Apr 28 12:51:14 RADIUS Acct: Acct-Start: User <masich>
?Debug : Apr 28 12:51:14 RADIUS Acct: No h323_disconnect_cause in packet!
?Debug : Apr 28 12:51:14 RADIUS DBA: Info for login <masich> found. type <1>
?Debug : Apr 28 12:51:24 RADIUS Acct: Acct packet with session ID: 49F6D19212BD00
?Debug : Apr 28 12:51:24 RADIUS Acct: Acct-Start packet
?Debug : Apr 28 12:51:24 RADIUS Acct: Acct-Start: User <masich>
?Debug : Apr 28 12:51:24 RADIUS Acct: No h323_disconnect_cause in packet!
?Debug : Apr 28 12:51:24 RADIUS DBA: Info for login <masich> found. type <1>
ERROR : Apr 28 12:51:24 RADIUS DBA: node != session_id_store.end().Return ec_busy
ERROR : Apr 28 12:51:24 RADIUS DBA: node != session_id_store.end().Return ec_busy
?Debug : Apr 28 12:51:34 RADIUS Acct: Acct packet with session ID: 49F6D19212BD00
?Debug : Apr 28 12:51:34 RADIUS Acct: Acct-Start packet
?Debug : Apr 28 12:51:34 RADIUS Acct: Acct-Start: User <masich>
?Debug : Apr 28 12:51:34 RADIUS Acct: No h323_disconnect_cause in packet!
?Debug : Apr 28 12:51:34 RADIUS DBA: Info for login <masich> found. type <1>
ERROR : Apr 28 12:51:34 RADIUS DBA: node != session_id_store.end().Return ec_busy
ERROR : Apr 28 12:51:34 RADIUS DBA: node != session_id_store.end().Return ec_busy
ERROR : Apr 28 12:51:34 RADIUS URFA[upload]: [worker]: Reusing thread for [restart]...
ERROR : Apr 28 12:51:34 RADIUS URFA[upload]: [worker]: Reusing thread for [restart]...
Info : Apr 28 12:51:34 RADIUS URFA[upload]: [restart]: Reconnect succeded
Info : Apr 28 12:51:34 RADIUS URFA[upload]: [restart]: Reconnect succeded
Info : Apr 28 12:51:34 RADIUS URFA[upload]: [restart]: Reusing thread for [worker]...
Info : Apr 28 12:51:34 RADIUS URFA[upload]: [restart]: Reusing thread for [worker]...
?Debug : Apr 28 12:51:44 RADIUS Acct: Acct packet with session ID: 49F6D1B012BD01
?Debug : Apr 28 12:51:44 RADIUS Acct: Acct-Start packet
?Debug : Apr 28 12:51:44 RADIUS Acct: Acct-Start: User <masich>
?Debug : Apr 28 12:51:44 RADIUS Acct: No h323_disconnect_cause in packet!
?Debug : Apr 28 12:51:44 RADIUS DBA: Info for login <masich> found. type <1>
?Debug : Apr 28 12:53:39 RADIUS Acct: Acct packet with session ID: 49F6D1B012BD01
?Debug : Apr 28 12:53:39 RADIUS Acct: Acct-Stop packet
?Debug : Apr 28 12:53:39 RADIUS Acct: No h323_disconnect_cause in packet!
?Debug : Apr 28 12:53:51 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 28 12:53:51 RADIUS Auth: User <yarik> connecting
?Debug : Apr 28 12:53:51 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 28 12:53:51 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:53:51 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 28 12:53:51 RADIUS Auth: CHAP: Challenge size: 20
?Debug : Apr 28 12:53:51 RADIUS Auth: CHAP: Authorized user <yarik>
?Debug : Apr 28 12:53:51 RADIUS Auth: Blocked user is going to login...
?Debug : Apr 28 12:53:51 RADIUS Auth: Calling fill radius attributes for NAS. Attr storage size <0>
Notice: Apr 28 12:53:51 RADIUS Auth: Authorization failed for user <yarik>
Notice: Apr 28 12:53:51 RADIUS Auth: Authorization failed for user <yarik>
?Debug : Apr 28 12:54:06 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 28 12:54:06 RADIUS Auth: User <yarik> connecting
?Debug : Apr 28 12:54:06 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 28 12:54:06 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:54:06 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 28 12:54:06 RADIUS Auth: CHAP: Challenge size: 19
?Debug : Apr 28 12:54:06 RADIUS Auth: CHAP: Authorized user <yarik>
?Debug : Apr 28 12:54:06 RADIUS Auth: Blocked user is going to login...
?Debug : Apr 28 12:54:06 RADIUS Auth: Calling fill radius attributes for NAS. Attr storage size <0>
Notice: Apr 28 12:54:06 RADIUS Auth: Authorization failed for user <yarik>
Notice: Apr 28 12:54:06 RADIUS Auth: Authorization failed for user <yarik>
?Debug : Apr 28 12:55:16 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 28 12:55:16 RADIUS Auth: User <yarik> connecting
?Debug : Apr 28 12:55:16 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 28 12:55:16 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:55:16 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 28 12:55:16 RADIUS Auth: CHAP: Challenge size: 21
?Debug : Apr 28 12:55:16 RADIUS Auth: CHAP: Authorized user <yarik>
?Debug : Apr 28 12:55:16 RADIUS Auth: Blocked user is going to login...
?Debug : Apr 28 12:55:16 RADIUS Auth: Calling fill radius attributes for NAS. Attr storage size <0>
Notice: Apr 28 12:55:16 RADIUS Auth: Authorization failed for user <yarik>
Notice: Apr 28 12:55:16 RADIUS Auth: Authorization failed for user <yarik>
?Debug : Apr 28 12:55:58 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 28 12:55:58 RADIUS Auth: User <yarik> connecting
?Debug : Apr 28 12:55:58 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 28 12:55:58 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:55:58 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 28 12:55:58 RADIUS Auth: CHAP: Challenge size: 18
?Debug : Apr 28 12:55:58 RADIUS Auth: CHAP: Authorized user <yarik>
?Debug : Apr 28 12:55:58 RADIUS Auth: Blocked user is going to login...
?Debug : Apr 28 12:55:58 RADIUS Auth: Calling fill radius attributes for NAS. Attr storage size <0>
Notice: Apr 28 12:55:58 RADIUS Auth: Authorization failed for user <yarik>
Notice: Apr 28 12:55:58 RADIUS Auth: Authorization failed for user <yarik>
?Debug : Apr 28 12:56:02 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 28 12:56:02 RADIUS Auth: User <yarik> connecting
?Debug : Apr 28 12:56:02 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 28 12:56:02 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:56:02 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 28 12:56:02 RADIUS Auth: CHAP: Challenge size: 19
?Debug : Apr 28 12:56:02 RADIUS Auth: CHAP: Authorized user <yarik>
?Debug : Apr 28 12:56:02 RADIUS Auth: Blocked user is going to login...
?Debug : Apr 28 12:56:02 RADIUS Auth: Calling fill radius attributes for NAS. Attr storage size <0>
Notice: Apr 28 12:56:02 RADIUS Auth: Authorization failed for user <yarik>
Notice: Apr 28 12:56:02 RADIUS Auth: Authorization failed for user <yarik>
?Debug : Apr 28 12:56:41 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 28 12:56:41 RADIUS Auth: User <yarik> connecting
?Debug : Apr 28 12:56:41 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 28 12:56:41 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 12:56:41 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 28 12:56:41 RADIUS Auth: CHAP: Challenge size: 16
?Debug : Apr 28 12:56:41 RADIUS Auth: CHAP: Authorized user <yarik>
?Debug : Apr 28 12:56:41 RADIUS Auth: Blocked user is going to login...
?Debug : Apr 28 12:56:41 RADIUS Auth: Calling fill radius attributes for NAS. Attr storage size <0>
Notice: Apr 28 12:56:41 RADIUS Auth: Authorization failed for user <yarik>
Notice: Apr 28 12:56:41 RADIUS Auth: Authorization failed for user <yarik>
Info : Apr 28 13:00:00 UTM5 Logger: New ` Info : ' stream: /netup/utm5/log/radius_main.log
Info : Apr 28 13:00:00 UTM5 Logger: New `?Debug : ' stream: /netup/utm5/log/radius_main.log
Info : Apr 28 13:00:00 UTM5 Logger: New `?Debug : ' stream: /netup/utm5/log/radius_main.log
Notice: Apr 28 13:00:00 RADIUS Config: SSL is disabled. All data is transmitted to/from utm5_core unencrypted!
Notice: Apr 28 13:00:00 RADIUS Config: SSL is disabled. All data is transmitted to/from utm5_core unencrypted!
Info : Apr 28 13:00:00 RADIUS URFA[upload]: Worker thread created
Info : Apr 28 13:00:00 RADIUS URFA[upload]: Worker thread created
Info : Apr 28 13:00:00 RADIUS URFA[upload]: [worker]: Thread created
Info : Apr 28 13:00:00 RADIUS URFA[upload]: [worker]: Thread created
Info : Apr 28 13:00:00 RADIUS URFA[plugin]: Worker thread created
Info : Apr 28 13:00:00 RADIUS URFA[plugin]: Worker thread created
ERROR : Apr 28 13:00:00 RADIUS Auth: Connect failed: 98: Address already in use
ERROR : Apr 28 13:00:00 RADIUS Auth: Connect failed: 98: Address already in use
ERROR : Apr 28 13:00:00 RADIUS Acct: Connect failed: 98: Address already in use
ERROR : Apr 28 13:00:00 RADIUS Acct: Connect failed: 98: Address already in use
Notice: Apr 28 13:00:00 RADIUS Config: Pid file found: /var/run/utm5_radius.pid; Overwriting
Notice: Apr 28 13:00:00 RADIUS Config: Pid file found: /var/run/utm5_radius.pid; Overwriting
Info : Apr 28 13:00:00 RADIUS URFA[plugin]: [worker]: Thread created
Info : Apr 28 13:00:00 RADIUS URFA[plugin]: [worker]: Thread created
?Debug : Apr 28 13:00:34 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 28 13:00:34 RADIUS Auth: User <yarik> connecting
?Debug : Apr 28 13:00:34 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 28 13:00:34 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 13:00:34 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 28 13:00:34 RADIUS Auth: CHAP: Challenge size: 18
?Debug : Apr 28 13:00:34 RADIUS Auth: CHAP: Authorized user <yarik>
?Debug : Apr 28 13:00:34 RADIUS Auth: Blocked user is going to login...
?Debug : Apr 28 13:00:34 RADIUS Auth: Calling fill radius attributes for NAS. Attr storage size <0>
Notice: Apr 28 13:00:34 RADIUS Auth: Authorization failed for user <yarik>
Notice: Apr 28 13:00:34 RADIUS Auth: Authorization failed for user <yarik>
?Debug : Apr 28 13:03:33 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 28 13:03:33 RADIUS Auth: User <yarik> connecting
?Debug : Apr 28 13:03:33 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 28 13:03:33 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 28 13:03:33 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 28 13:03:33 RADIUS Auth: CHAP: Challenge size: 19
?Debug : Apr 28 13:03:33 RADIUS Auth: CHAP: Authorized user <yarik>
?Debug : Apr 28 13:03:33 RADIUS Auth: Blocked user is going to login...
?Debug : Apr 28 13:03:33 RADIUS Auth: Calling fill radius attributes for NAS. Attr storage size <0>
Notice: Apr 28 13:03:33 RADIUS Auth: Authorization failed for user <yarik>
Notice: Apr 28 13:03:33 RADIUS Auth: Authorization failed for user <yarik>

И логи radius5



Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection to urfa server failed
Core host: <127.0.0.1>, core port: <11758>, connection timeout...
Core host: <127.0.0.1>, core port: <11758>, core version: <core error>
Core host: <127.0.0.1>, core port: <11758>, connection timeout...
Core host: <127.0.0.1>, core port: <11758>, core version: <5.1.10>
Info : Apr 28 12:48:40 RADIUS Tarif: Created...
Notice: Apr 28 12:48:40 RADIUS Config: Processing config file: /netup/utm5/radius5.cfg
Info : Apr 28 12:48:40 UTM5 Logger: New `*CRIT : ' stream: /netup/utm5/log/radius.log
Info : Apr 28 12:48:40 UTM5 Logger: New ` Info : ' stream: /netup/utm5/log/radius_main.log
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800005: 0xa800007
Bind: 0xa800005: 0xa800007
Bind: 0xa800007: 0xa800006
Bind: 0xa800007: 0xa800006
Bind: 0xa800007: 0xa800006
Bind: 0xa800007: 0xa800006
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800008
Bind: 0xa800008: 0xa800008
Bind: 0xa800008: 0xa800008
Bind: 0xa800008: 0xa800008
Bind: 0xa800008: 0xa800008
Core host: <127.0.0.1>, core port: <11758>, core version: <5.1.10>
Info : Apr 28 12:49:04 RADIUS Tarif: Created...
Notice: Apr 28 12:49:04 RADIUS Config: Processing config file: /netup/utm5/radius5.cfg
Info : Apr 28 12:49:04 UTM5 Logger: New `*CRIT : ' stream: /netup/utm5/log/radius.log
Info : Apr 28 12:49:04 UTM5 Logger: New ` Info : ' stream: /netup/utm5/log/radius_main.log
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800006: 0xa800005
Bind: 0xa800005: 0xa800007
Bind: 0xa800005: 0xa800007
Bind: 0xa800007: 0xa800006
Bind: 0xa800007: 0xa800006
Bind: 0xa800007: 0xa800006
Bind: 0xa800007: 0xa800006
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800007
Bind: 0xa800008: 0xa800008
Bind: 0xa800008: 0xa800008
Bind: 0xa800008: 0xa800008
Bind: 0xa800008: 0xa800008
Bind: 0xa800008: 0xa800008
Core host: <127.0.0.1>, core port: <11758>, core version: <5.1.10>
Info : Apr 28 12:49:14 RADIUS Tarif: Created...
Notice: Apr 28 12:49:14 RADIUS Config: Processing config file: /netup/utm5/radius5.cfg
Info : Apr 28 12:49:14 UTM5 Logger: New `*CRIT : ' stream: /netup/utm5/log/radius.log
Info : Apr 28 12:49:14 UTM5 Logger: New ` Info : ' stream: /netup/utm5/log/radius_main.log
Size: 100; HDR.Size: 100
RPacket:
Code: 1; ID: 130
<Vendor: 0; Attr: 1>[6]: 6d6173696368
<Vendor: 0; Attr: 3>[17]: db073b8442acc4f82a72485b4dac1a158d
<Vendor: 0; Attr: 4>[4]: 7f000001
<Vendor: 0; Attr: 5>[4]: 00000000
<Vendor: 0; Attr: 6>[4]: 00000002
<Vendor: 0; Attr: 7>[4]: 00000001
<Vendor: 0; Attr: 31>[8]: 31302e302e302e36
<Vendor: 0; Attr: 60>[17]: b17951e211efe66cb9404caf3c0e986c41

Dropped on timeout: 0
Reply:
RPacket:
Code: 2; ID: 130
<Vendor: 0; Attr: 6>[4]: 00000002
<Vendor: 0; Attr: 7>[4]: 00000001
<Vendor: 0; Attr: 8>[4]: 0a800008
<Vendor: 0; Attr: 9>[4]: ffffffff
<Vendor: 0; Attr: 10>[4]: 00000000
&lt
Вернуться к началу
gil
Сообщения: 355
Зарегистрирован: Вт ноя 11, 2008 14:28

Сообщение gil »

радиус уже какой-то другой стоит? или я не втыкаю?


ERROR : Apr 28 12:49:14 RADIUS Acct: Connect failed: 98: Address already in use
ERROR : Apr 28 12:49:14 RADIUS Acct: Connect failed: 98: Address already in use
ERROR : Apr 28 12:49:14 RADIUS Auth: Connect failed: 98: Address already in use
ERROR : Apr 28 12:49:14 RADIUS Auth: Connect failed: 98: Address already in use
Вернуться к началу
masich
Сообщения: 19
Зарегистрирован: Сб ноя 22, 2008 02:47

Сообщение masich »

Так я ни какой больше радиус не ставил!Только радиус клиент!
Вернуться к началу
gil
Сообщения: 355
Зарегистрирован: Вт ноя 11, 2008 14:28

Сообщение gil »

debug.log в студию.. когда пользователю добавляешь денег, и пытаешься подключиться..
Вернуться к началу
masich
Сообщения: 19
Зарегистрирован: Сб ноя 22, 2008 02:47

Сообщение masich »

Вот эти ошибки я убрал
ERROR : Apr 28 12:49:14 RADIUS Acct: Connect failed: 98: Address already in use
ERROR : Apr 28 12:49:14 RADIUS Acct: Connect failed: 98: Address already in use
ERROR : Apr 28 12:49:14 RADIUS Auth: Connect failed: 98: Address already in use
ERROR : Apr 28 12:49:14 RADIUS Auth: Connect failed: 98: Address already in use

Но теперь у меня появилась ошибка 691 при подключении по впн.

Вот лог

Info : Apr 29 22:14:15 UTM5 Logger: New ` Info : ' stream: /netup/utm5/log/radius_main.log
Info : Apr 29 22:14:15 UTM5 Logger: New `?Debug : ' stream: /netup/utm5/log/radius_main.log
Info : Apr 29 22:14:15 UTM5 Logger: New `?Debug : ' stream: /netup/utm5/log/radius_main.log
Info : Apr 29 22:14:15 RADIUS URFA[upload]: Worker thread created
Info : Apr 29 22:14:15 RADIUS URFA[upload]: Worker thread created
Info : Apr 29 22:14:15 RADIUS URFA[upload]: [worker]: Thread created
Info : Apr 29 22:14:15 RADIUS URFA[upload]: [worker]: Thread created
Info : Apr 29 22:14:15 RADIUS URFA[plugin]: Worker thread created
Info : Apr 29 22:14:15 RADIUS URFA[plugin]: Worker thread created
Info : Apr 29 22:14:15 RADIUS URFA[plugin]: [worker]: Thread created
Info : Apr 29 22:14:15 RADIUS URFA[plugin]: [worker]: Thread created
?Debug : Apr 29 22:14:15 RADIUS URFA[plugin]: IP for IP-GroupID/A/Slink/Service: 1/1/1/2. 1 nodes
?Debug : Apr 29 22:14:15 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
?Debug : Apr 29 22:14:15 RADIUS URFA[plugin]: IP-traffic service <1> received
?Debug : Apr 29 22:14:15 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
?Debug : Apr 29 22:14:15 RADIUS URFA[plugin]: IP-traffic service <2> received
?Debug : Apr 29 22:14:15 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS result. Data size <0>
ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS result. Data size <0>
Info : Apr 29 22:14:15 NASCache<127.0.0.1>: Created...
Info : Apr 29 22:14:15 NASCache<127.0.0.1>: Created...
Info : Apr 29 22:14:15 RADIUS URFA[plugin]: NAS <127.0.0.1> added/modified
Info : Apr 29 22:14:15 RADIUS URFA[plugin]: NAS <127.0.0.1> added/modified
?Debug : Apr 29 22:14:15 RADIUS URFA[plugin]: Receiving RADIUS attributes ...
ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS result. Data size <0>
ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS result. Data size <0>
Info : Apr 29 22:14:15 NASCache<localhost>: Created...
Info : Apr 29 22:14:15 NASCache<localhost>: Created...
Info : Apr 29 22:14:15 RADIUS URFA[plugin]: NAS <localhost> added/modified
Info : Apr 29 22:14:15 RADIUS URFA[plugin]: NAS <localhost> added/modified
?Debug : Apr 29 22:14:15 RADIUS URFA[plugin]: TimeRange <1>
Info : Apr 29 22:14:15 RADIUS DBA: Starting directions sort...
Info : Apr 29 22:14:15 RADIUS DBA: Starting directions sort...
Info : Apr 29 22:14:15 RADIUS DBA: Finished directions sort...
Info : Apr 29 22:14:15 RADIUS DBA: Finished directions sort...
?Debug : Apr 29 22:14:15 RADIUS URFA[plugin]: Account <1> with balance <6.500>
Info : Apr 29 22:14:15 RADIUS URFA[plugin]: Updating realm list
Info : Apr 29 22:14:15 RADIUS URFA[plugin]: Updating realm list
?Debug : Apr 29 22:14:15 RADIUS DBA: Flushing REALM list
?Debug : Apr 29 22:15:58 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 29 22:15:58 RADIUS Auth: User <test> connecting
?Debug : Apr 29 22:15:58 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 29 22:15:58 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 29 22:15:58 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 29 22:15:58 RADIUS Auth: CHAP: Using Authenticator as CHAP-Challenge
?Debug : Apr 29 22:15:58 RADIUS Auth: CHAP: Rejected user <test>
Notice: Apr 29 22:15:58 RADIUS Auth: Authorization failed for user <test>
Notice: Apr 29 22:15:58 RADIUS Auth: Authorization failed for user <test>
?Debug : Apr 29 22:21:00 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 29 22:21:00 RADIUS Auth: User <test> connecting
?Debug : Apr 29 22:21:00 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 29 22:21:00 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 29 22:21:00 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 29 22:21:00 RADIUS Auth: CHAP: Using Authenticator as CHAP-Challenge
?Debug : Apr 29 22:21:00 RADIUS Auth: CHAP: Rejected user <test>
Notice: Apr 29 22:21:00 RADIUS Auth: Authorization failed for user <test>
Notice: Apr 29 22:21:00 RADIUS Auth: Authorization failed for user <test>
?Debug : Apr 29 22:27:00 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 29 22:27:00 RADIUS Auth: User <test> connecting
?Debug : Apr 29 22:27:00 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 29 22:27:00 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 29 22:27:00 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 29 22:27:00 RADIUS Auth: CHAP: Using Authenticator as CHAP-Challenge
?Debug : Apr 29 22:27:00 RADIUS Auth: CHAP: Rejected user <test>
Notice: Apr 29 22:27:00 RADIUS Auth: Authorization failed for user <test>
Notice: Apr 29 22:27:00 RADIUS Auth: Authorization failed for user <test>
?Debug : Apr 29 22:31:37 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 29 22:31:37 RADIUS Auth: User <test> connecting
?Debug : Apr 29 22:31:37 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 29 22:31:37 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 29 22:31:37 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 29 22:31:37 RADIUS Auth: CHAP: Using Authenticator as CHAP-Challenge
?Debug : Apr 29 22:31:37 RADIUS Auth: CHAP: Rejected user <test>
Notice: Apr 29 22:31:37 RADIUS Auth: Authorization failed for user <test>
Notice: Apr 29 22:31:37 RADIUS Auth: Authorization failed for user <test>
?Debug : Apr 29 22:31:41 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 29 22:31:41 RADIUS Auth: User <test> connecting
?Debug : Apr 29 22:31:41 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 29 22:31:41 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 29 22:31:41 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 29 22:31:41 RADIUS Auth: CHAP: Using Authenticator as CHAP-Challenge
?Debug : Apr 29 22:31:41 RADIUS Auth: CHAP: Rejected user <test>
Notice: Apr 29 22:31:41 RADIUS Auth: Authorization failed for user <test>
Notice: Apr 29 22:31:41 RADIUS Auth: Authorization failed for user <test>
?Debug : Apr 29 22:34:08 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 29 22:34:08 RADIUS Auth: User <test> connecting
?Debug : Apr 29 22:34:08 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 29 22:34:08 RADIUS DBA: Info for login <test> found. type <1>
?Debug : Apr 29 22:34:08 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 29 22:34:08 RADIUS Auth: CHAP: Using Authenticator as CHAP-Challenge
?Debug : Apr 29 22:34:08 RADIUS Auth: CHAP: Rejected user <test>
Notice: Apr 29 22:34:08 RADIUS Auth: Authorization failed for user <test>
Notice: Apr 29 22:34:08 RADIUS Auth: Authorization failed for user <test>

Почему так я не пойму
Вернуться к началу
gil
Сообщения: 355
Зарегистрирован: Вт ноя 11, 2008 14:28

Сообщение gil »

а настройки все верные? в качестве vpn-сервера что используете?
Вернуться к началу
masich
Сообщения: 19
Зарегистрирован: Сб ноя 22, 2008 02:47

Сообщение masich »

pptpd.
Делаю всё так как, как написано в мануале.
Вернуться к началу
masich
Сообщения: 19
Зарегистрирован: Сб ноя 22, 2008 02:47

Сообщение masich »

И что означают эти ошибки?

ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS. Data size <0>
ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS result. Data size <0>
ERROR : Apr 29 22:14:15 RADIUS DBA: Inserting NAS result. Data size <0>
Вернуться к началу
masich
Сообщения: 19
Зарегистрирован: Сб ноя 22, 2008 02:47

Сообщение masich »

вот лог при подключении по pap

?Debug : Apr 30 16:48:30 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 30 16:48:30 RADIUS Auth: User <yarik> connecting
?Debug : Apr 30 16:48:30 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 30 16:48:30 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 30 16:48:30 RADIUS Auth: Auth scheme: PAP
?Debug : Apr 30 16:48:30 RADIUS Auth: PAP: <123456> vs <123456>
?Debug : Apr 30 16:48:30 RADIUS Auth: PAP: Authorized user <yarik>
Warn : Apr 30 16:48:30 RADIUS Auth: Unable to claim IP: No such file or directory
Warn : Apr 30 16:48:30 RADIUS Auth: Unable to claim IP: No such file or directory
?Debug : Apr 30 16:48:30 RADIUS Auth: Calling fill radius attributes for NAS. Attr storage size <0>
Notice: Apr 30 16:48:30 RADIUS Auth: Authorization failed for user <yarik>
Notice: Apr 30 16:48:30 RADIUS Auth: Authorization failed for user <yarik>



А вот если chap

?Debug : Apr 30 16:48:12 RADIUS Auth: Packet from <127.0.0.1>
?Debug : Apr 30 16:48:12 RADIUS Auth: User <yarik> connecting
?Debug : Apr 30 16:48:12 RADIUS DBA: NAS found. Data size <0>
?Debug : Apr 30 16:48:12 RADIUS DBA: Info for login <yarik> found. type <1>
?Debug : Apr 30 16:48:12 RADIUS Auth: Auth scheme: CHAP
?Debug : Apr 30 16:48:12 RADIUS Auth: CHAP: Challenge size: 17
?Debug : Apr 30 16:48:12 RADIUS Auth: CHAP: Authorized user <yarik>
Warn : Apr 30 16:48:12 RADIUS Auth: Unable to claim IP: No such file or directory
Warn : Apr 30 16:48:12 RADIUS Auth: Unable to claim IP: No such file or directory
?Debug : Apr 30 16:48:12 RADIUS Auth: Calling fill radius attributes for NAS. Attr storage size <0>
Notice: Apr 30 16:48:12 RADIUS Auth: Authorization failed for user <yarik>
Notice: Apr 30 16:48:12 RADIUS Auth: Authorization failed for user <yarik>

Как решить проблему
Вернуться к началу
masich
Сообщения: 19
Зарегистрирован: Сб ноя 22, 2008 02:47

Сообщение masich »

вот лог при добавлении денег пользователю на счет

?Debug : Apr 30 16:53:03 RADIUS URFA[plugin]: Account <3> with balance <15.000>
?Debug : Apr 30 16:53:03 RADIUS URFA[plugin]: Account <3> with balance <15.000>
Вернуться к началу
masich
Сообщения: 19
Зарегистрирован: Сб ноя 22, 2008 02:47

Сообщение masich »

вот все мои конфиги впн!

/etc/ppp/options

auth
#require-pap
require-chap
#require-mschap-v2
local
10.128.0.1:
debug
plugin radius.so
plugin radattr.so
logfile /etc/ppp/pppd.log


/etc/pptpd.conf

option /etc/ppp/options
localip 10.128.0.1

/etc/radiusclient/radiusclient.conf

authserver localhost:1812

acctserver localhost:1813

/etc/radiusclient/servers

localhost radius
Вернуться к началу
Ответить

Вернуться в «UTM 5.0»