ДОБРОГО ВРЕМЕНИ СУТОК ВСЕМ!
возникла такая проблема есть cisco 2921 и utm 2.1.008, настроенно vpn.
клиенты удачно конектятся ...
вопрос в том что даже при отрицательном болансе они соеденяются и их не откидывает при достижении 0.. подскажите куда копать???
radius cisco- не отключает клиентов
Re: radius cisco- не отключает клиентов
viewtopic.php?p=35257мелкон писал(а):ДОБРОГО ВРЕМЕНИ СУТОК ВСЕМ!
возникла такая проблема есть cisco 2921 и utm 2.1.008, настроенно vpn.
клиенты удачно конектятся ...
вопрос в том что даже при отрицательном болансе они соеденяются и их не откидывает при достижении 0.. подскажите куда копать???
При отрицательном балансе не оно?
Re: radius cisco- не отключает клиентов
rudf писал(а):viewtopic.php?p=35257мелкон писал(а):ДОБРОГО ВРЕМЕНИ СУТОК ВСЕМ!
возникла такая проблема есть cisco 2921 и utm 2.1.008, настроенно vpn.
клиенты удачно конектятся ...
вопрос в том что даже при отрицательном болансе они соеденяются и их не откидывает при достижении 0.. подскажите куда копать???
При отрицательном балансе не оно?
в принципе похожая тема! только решение там нет!
вот мой конфиг и лог
packet into send queue
?Debug : Jun 21 22:54:51 b75b1b90 RadiusSocket: RADIUS raw data sent
?Debug : Jun 21 22:54:51 b75b1b90 AcctServer: Next...
?Debug : Jun 21 22:54:51 b75b1b90 RadiusSocket: Waiting for RADIUS raw data
?Debug : Jun 21 22:54:59 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 22:55:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 22:55:29 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 22:55:46 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 22:55:59 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 22:56:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 22:56:29 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 22:56:46 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 22:56:59 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 22:57:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 22:57:29 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 22:57:46 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 22:57:59 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 22:58:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 22:58:29 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 22:58:46 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 22:58:59 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 22:59:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 22:59:29 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 22:59:46 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 22:59:59 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:00:03 b60aeb90 RadiusSocket: RADIUS packet successfully received
?Debug : Jun 21 23:00:03 b75b1b90 RadiusSocket: RADIUS raw data obtained
?Debug : Jun 21 23:00:03 b75b1b90 RADIUS Packet: Size <196>; HDR.Size <196>
?Debug : Jun 21 23:00:03 b75b1b90 AcctServer: Recv...
?Debug : Jun 21 23:00:03 b75b1b90 AcctServer: Packet from <192.168.64.1> packet dump: RPacket:
Code: 4; ID: 82
<Vendor: 0; Attr: 1>[6]: 6d656c6b6f6e
<Vendor: 0; Attr: 4>[4]: c0a84001
<Vendor: 0; Attr: 5>[4]: 0000000c
<Vendor: 0; Attr: 6>[4]: 00000002
<Vendor: 0; Attr: 7>[4]: 00000001
<Vendor: 0; Attr: 8>[4]: c0a81437
<Vendor: 0; Attr: 40>[4]: 00000003
<Vendor: 0; Attr: 41>[4]: 00000000
<Vendor: 0; Attr: 42>[4]: 00258f66
<Vendor: 0; Attr: 43>[4]: 00f9675d
<Vendor: 0; Attr: 44>[16]: 43304138343030313030303030303142
<Vendor: 0; Attr: 45>[4]: 00000001
<Vendor: 0; Attr: 46>[4]: 00002461
<Vendor: 0; Attr: 47>[4]: 0000645a
<Vendor: 0; Attr: 48>[4]: 00006d51
<Vendor: 0; Attr: 61>[4]: 00000005
<Vendor: 0; Attr: 65>[4]: 00000001
<Vendor: 0; Attr: 66>[11]: 3137322e31302e312e3433
<Vendor: 0; Attr: 67>[10]: 3137322e31302e312e31
<Vendor: 0; Attr: 68>[5]: 3230333531
<Vendor: 0; Attr: 82>[1]: 31
<Vendor: 0; Attr: 87>[14]: 556e69712d536573732d49443132
<Vendor: 0; Attr: 91>[7]: 67746b2d677731
?Debug : Jun 21 23:00:03 b75b1b90 RADIUS DBA: NAS found. Data size <0>
?Debug : Jun 21 23:00:03 b75b1b90 AcctServer: Acct packet with session ID: C0A840010000001B
?Debug : Jun 21 23:00:03 b75b1b90 RADIUS DBA: NAS found. Data size <0>
?Debug : Jun 21 23:00:03 b75b1b90 AcctServer: Acct-Interim-Update packet
?Debug : Jun 21 23:00:03 b75b1b90 AcctServer: Acct-Update: User <melkon>
?Debug : Jun 21 23:00:03 b75b1b90 AcctServer: Updating session <C0A840010000001B> input/output octets <2461542>/<16344925> session time <9313>
?Debug : Jun 21 23:00:03 b75b1b90 RADIUS DBA: Interim updating session <C0A840010000001B> with timestamp <1340305203>
?Debug : Jun 21 23:00:03 b75b1b90 RADIUS Stream[plugin]: edit log id <3>
?Debug : Jun 21 23:00:03 b75b1b90 AcctServer: Reply packet dump: RPacket:
Code: 5; ID: 82
?Debug : Jun 21 23:00:03 b75b1b90 RadiusSocket: Moving RADIUS packet into send queue
?Debug : Jun 21 23:00:03 b75b1b90 RadiusSocket: RADIUS raw data sent
?Debug : Jun 21 23:00:03 b75b1b90 AcctServer: Next...
?Debug : Jun 21 23:00:03 b75b1b90 RadiusSocket: Waiting for RADIUS raw data
?Debug : Jun 21 23:00:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:00:29 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:00:46 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:00:49 b5dffb90 RADIUS Stream[plugin]: Account <3> with balance <2.241> credit <0.000>
?Debug : Jun 21 23:00:59 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:01:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:01:29 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:01:34 b5dffb90 RADIUS Stream[plugin]: Account <3> with balance <1.315> credit <0.000>
?Debug : Jun 21 23:01:46 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:01:59 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:02:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:02:29 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:02:46 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:02:59 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:03:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:03:29 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:03:46 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:04:00 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:04:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:04:30 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:04:46 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:04:52 b60aeb90 RadiusSocket: RADIUS packet successfully received
?Debug : Jun 21 23:04:52 b75b1b90 RadiusSocket: RADIUS raw data obtained
?Debug : Jun 21 23:04:52 b75b1b90 RADIUS Packet: Size <196>; HDR.Size <196>
?Debug : Jun 21 23:04:52 b75b1b90 AcctServer: Recv...
?Debug : Jun 21 23:04:52 b75b1b90 AcctServer: Packet from <192.168.64.1> packet dump: RPacket:
Code: 4; ID: 83
<Vendor: 0; Attr: 1>[6]: 6d656c6b6f6e
<Vendor: 0; Attr: 4>[4]: c0a84001
<Vendor: 0; Attr: 5>[4]: 0000000c
<Vendor: 0; Attr: 6>[4]: 00000002
<Vendor: 0; Attr: 7>[4]: 00000001
<Vendor: 0; Attr: 8>[4]: c0a81437
<Vendor: 0; Attr: 40>[4]: 00000003
<Vendor: 0; Attr: 41>[4]: 00000000
<Vendor: 0; Attr: 42>[4]: 0027897c
<Vendor: 0; Attr: 43>[4]: 00ff1960
<Vendor: 0; Attr: 44>[16]: 43304138343030313030303030303142
<Vendor: 0; Attr: 45>[4]: 00000001
<Vendor: 0; Attr: 46>[4]: 00002582
<Vendor: 0; Attr: 47>[4]: 00006848
<Vendor: 0; Attr: 48>[4]: 0000710a
<Vendor: 0; Attr: 61>[4]: 00000005
<Vendor: 0; Attr: 65>[4]: 00000001
<Vendor: 0; Attr: 66>[11]: 3137322e31302e312e3433
<Vendor: 0; Attr: 67>[10]: 3137322e31302e312e31
<Vendor: 0; Attr: 68>[5]: 3230333531
<Vendor: 0; Attr: 82>[1]: 31
<Vendor: 0; Attr: 87>[14]: 556e69712d536573732d49443132
<Vendor: 0; Attr: 91>[7]: 67746b2d677731
?Debug : Jun 21 23:04:52 b75b1b90 RADIUS DBA: NAS found. Data size <0>
?Debug : Jun 21 23:04:52 b75b1b90 AcctServer: Acct packet with session ID: C0A840010000001B
?Debug : Jun 21 23:04:52 b75b1b90 RADIUS DBA: NAS found. Data size <0>
?Debug : Jun 21 23:04:52 b75b1b90 AcctServer: Acct-Interim-Update packet
?Debug : Jun 21 23:04:52 b75b1b90 AcctServer: Acct-Update: User <melkon>
?Debug : Jun 21 23:04:52 b75b1b90 AcctServer: Updating session <C0A840010000001B> input/output octets <2591100>/<16718176> session time <9602>
?Debug : Jun 21 23:04:52 b75b1b90 RADIUS DBA: Interim updating session <C0A840010000001B> with timestamp <1340305492>
?Debug : Jun 21 23:04:52 b75b1b90 RADIUS Stream[plugin]: edit log id <3>
?Debug : Jun 21 23:04:52 b75b1b90 AcctServer: Reply packet dump: RPacket:
Code: 5; ID: 83
?Debug : Jun 21 23:04:52 b75b1b90 RadiusSocket: Moving RADIUS packet into send queue
?Debug : Jun 21 23:04:52 b75b1b90 RadiusSocket: RADIUS raw data sent
?Debug : Jun 21 23:04:52 b75b1b90 AcctServer: Next...
?Debug : Jun 21 23:04:52 b75b1b90 RadiusSocket: Waiting for RADIUS raw data
?Debug : Jun 21 23:05:00 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:05:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:05:30 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:05:46 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
?Debug : Jun 21 23:06:00 b5dffb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:06:16 b6bb0b90 RADIUS DBA: No interim update enabled session <3> found. Setting to default (if enabled).
Info : Jun 21 23:06:21 b7fdc6e0 UTM5 Logger: New `?Debug : ' stream: /netup/utm5/log/radius.log
Info : Jun 21 23:06:21 b7fdc6e0 UTM5 Logger: New ` Info : ' stream: /netup/utm5/log/radius.log
Notice: Jun 21 23:06:21 b7fdc6e0 RADIUS Config: interim_update_interval less than 60 sec! Setting it to 60 sec ...
?Debug : Jun 21 23:06:21 b7fdc6e0 RADIUS Config: Using classic BaseTelephony
?Trace : Jun 21 23:06:21 b7fdc6e0 RADIUS DBA: New state: ds_failed
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: Registering message handlers..
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2001> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2002> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2003> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2004> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2005> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2006> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2007> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2008> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2009> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x200a> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x200b> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x200c> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x200d> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x200e> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x200f> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2010> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2011> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2012> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2013> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2014> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2015> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2016> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2019> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x201a> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x201b> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x201c> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x201e> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x201f> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2020> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2021> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2022> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2023> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x202c> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x202d> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x202e> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x202f> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2030> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2031> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2032> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x2033> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b7fdc6e0 StreamManager: ID <0x70000000> handler <0x08c04ed8>
Info : Jun 21 23:06:21 b75dab90 RadiusSocket: Listening on 0.0.0.0:1813
Info : Jun 21 23:06:21 b5efeb90 StreamConnection: Connection thread started. Peer 127.0.0.1:12758
Info : Jun 21 23:06:21 b7fdbb90 RadiusSocket: Listening on 0.0.0.0:1812
?Debug : Jun 21 23:06:21 b5efeb90 StreamConnection: Connection using TCP socket
?Trace : Jun 21 23:06:21 b7fdbb90 AuthServer: Entering process loop
?Debug : Jun 21 23:06:21 b5efeb90 StreamConnection: System message <-31> recived
?Debug : Jun 21 23:06:21 b5efeb90 StreamConnection: Challenge response sent
?Debug : Jun 21 23:06:21 b5efeb90 StreamConnection: System message <-33> recived
Info : Jun 21 23:06:21 b5efeb90 StreamConnection: Connection successfully authorized, user id <-2>
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: dialup features received
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Got license info..
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS DBA: Updating Named Pool: nat
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS DBA: New Named Pool inserted: nat
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: End receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: IP for IP-GroupID/A/Slink/Service: 1/1/1/3. 1 nodes
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: End receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: IP for IP-GroupID/A/Slink/Service: 2/2/2/1. 1 nodes
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: End receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: IP for IP-GroupID/A/Slink/Service: 3/3/3/3. 1 nodes
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: End receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: IP-traffic service <1> received
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: End receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: IP-traffic service <2> received
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: End receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: IP-traffic service <3> received
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: End receiving RADIUS attributes ...
Info : Jun 21 23:06:21 b5efeb90 RADIUS DBA: Inserting NAS. Data size <0>
Info : Jun 21 23:06:21 b5efeb90 RADIUS DBA: Inserting NAS result. Data size <0>
Info : Jun 21 23:06:21 b5efeb90 NASCache<192.168.64.1>: Created...
Info : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: NAS <192.168.64.1> added/modified
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: TimeRange <1>
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: cost table size 1
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: prepaid key 1 quantity 0.000000
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: borders size 1
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: border 0.000000 cost 1.000000
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: time-mult size 1
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: timerange_id 1 cost 0.000000
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: grp2trf size 0
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: End receiving RADIUS attributes ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: DialUp service <4>
Info : Jun 21 23:06:21 b5efeb90 RADIUS DBA: Starting directions sort...
Info : Jun 21 23:06:21 b5efeb90 RADIUS DBA: Finished directions sort...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Account <1> with balance <15.000> credit <0.000>
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Account <2> with balance <55.000> credit <0.000>
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Account <3> with balance <1.315> credit <0.000>
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Account <4> with balance <0.000> credit <0.000>
Info : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Updating realm list
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS DBA: Flushing REALM list
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS DBA: Info for login <melkon> found. type <1>
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS DBA: info for user found. type <1> info addr <146866864>
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS DBA: search_user_info return info <146866864>
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS DBA: search_user_info return valid info
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS DBA: session_log_insert: service_type <2>, setting default session timeout value
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS IPPool: Bind <c0a81437> : <c0a81437>
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS DBA: Setting interim interval <0> for session id <C0A840010000001B>
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS DBA: id2core_add calling ...
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS DBA: id2core_add core_id <18> id <1>
?Debug : Jun 21 23:06:21 b7fdc6e0 RADIUS Config: RADIUS server ready to serve requests
?Trace : Jun 21 23:06:21 b7fdc6e0 RADIUS DBA: New state: ds_up
?Trace : Jun 21 23:06:21 b7fdbb90 AuthServer: Process loop step
?Debug : Jun 21 23:06:21 b7fdbb90 RadiusSocket: Waiting for RADIUS raw data
?Debug : Jun 21 23:06:21 b75dab90 RadiusSocket: Waiting for RADIUS raw data
?Debug : Jun 21 23:06:21 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:06:41 b5fffb90 RadiusSocket: RADIUS packet successfully received
?Debug : Jun 21 23:06:41 b75dab90 RadiusSocket: RADIUS raw data obtained
?Debug : Jun 21 23:06:41 b75dab90 RADIUS Packet: Size <202>; HDR.Size <202>
?Debug : Jun 21 23:06:41 b75dab90 AcctServer: Recv...
?Debug : Jun 21 23:06:41 b75dab90 AcctServer: Packet from <192.168.64.1> packet dump: RPacket:
Code: 4; ID: 84
<Vendor: 0; Attr: 1>[6]: 6d656c6b6f6e
<Vendor: 0; Attr: 4>[4]: c0a84001
<Vendor: 0; Attr: 5>[4]: 0000000c
<Vendor: 0; Attr: 6>[4]: 00000002
<Vendor: 0; Attr: 7>[4]: 00000001
<Vendor: 0; Attr: 8>[4]: c0a81437
<Vendor: 0; Attr: 40>[4]: 00000002
<Vendor: 0; Attr: 41>[4]: 00000000
<Vendor: 0; Attr: 42>[4]: 0027e85c
<Vendor: 0; Attr: 43>[4]: 00ff5e9f
<Vendor: 0; Attr: 44>[16]: 43304138343030313030303030303142
<Vendor: 0; Attr: 45>[4]: 00000001
<Vendor: 0; Attr: 46>[4]: 000025ef
<Vendor: 0; Attr: 47>[4]: 00006901
<Vendor: 0; Attr: 48>[4]: 000071c5
<Vendor: 0; Attr: 49>[4]: 00000001
<Vendor: 0; Attr: 61>[4]: 00000005
<Vendor: 0; Attr: 65>[4]: 00000001
<Vendor: 0; Attr: 66>[11]: 3137322e31302e312e3433
<Vendor: 0; Attr: 67>[10]: 3137322e31302e312e31
<Vendor: 0; Attr: 68>[5]: 3230333531
<Vendor: 0; Attr: 82>[1]: 31
<Vendor: 0; Attr: 87>[14]: 556e69712d536573732d49443132
<Vendor: 0; Attr: 91>[7]: 67746b2d677731
?Debug : Jun 21 23:06:41 b75dab90 RADIUS DBA: NAS found. Data size <0>
?Debug : Jun 21 23:06:41 b75dab90 AcctServer: Acct packet with session ID: C0A840010000001B
?Debug : Jun 21 23:06:41 b75dab90 RADIUS DBA: NAS found. Data size <0>
?Debug : Jun 21 23:06:41 b75dab90 AcctServer: Acct-Stop packet
?Debug : Jun 21 23:06:41 b75dab90 RADIUS DBA: Session erase ... login type <1>
?Debug : Jun 21 23:06:41 b75dab90 RADIUS DBA: login type login_pool or login_named_pool
?Debug : Jun 21 23:06:41 b75dab90 RADIUS IPPool: Released <c0a81437>
?Debug : Jun 21 23:06:41 b75dab90 RADIUS Stream[plugin]: finish log id <1>
?Debug : Jun 21 23:06:41 b75dab90 AcctServer: Reply packet dump: RPacket:
Code: 5; ID: 84
?Debug : Jun 21 23:06:41 b75dab90 RadiusSocket: Moving RADIUS packet into send queue
?Debug : Jun 21 23:06:41 b75dab90 RadiusSocket: RADIUS raw data sent
?Debug : Jun 21 23:06:41 b75dab90 AcctServer: Next...
?Debug : Jun 21 23:06:41 b75dab90 RadiusSocket: Waiting for RADIUS raw data
?Debug : Jun 21 23:06:51 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:06:57 b5dfdb90 RadiusSocket: RADIUS packet successfully received
?Debug : Jun 21 23:06:57 b7fdbb90 RadiusSocket: RADIUS raw data obtained
?Debug : Jun 21 23:06:57 b7fdbb90 RADIUS Packet: Size <128>; HDR.Size <128>
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: Recv...
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: Packet from NAS <192.168.64.1>
?Debug : Jun 21 23:06:57 b7fdbb90 RADIUS DBA: NAS found. Data size <0>
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: Packet from <192.168.64.1> packet dump: RPacket:
Code: 1; ID: 14
<Vendor: 0; Attr: 1>[6]: 6d656c6b6f6e
<Vendor: 0; Attr: 3>[17]: 01459935a03252998c6e58d8d2054b4b0a
<Vendor: 0; Attr: 4>[4]: c0a84001
<Vendor: 0; Attr: 5>[4]: 0000000d
<Vendor: 0; Attr: 6>[4]: 00000002
<Vendor: 0; Attr: 7>[4]: 00000001
<Vendor: 0; Attr: 32>[15]: 67746b2d6777312e67746b2d677731
<Vendor: 0; Attr: 44>[16]: 43304138343030313030303030303234
<Vendor: 0; Attr: 61>[4]: 00000005
<Vendor: 0; Attr: 87>[14]: 556e69712d536573732d49443133
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: User <melkon> connecting
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: Session for sessionid <melkon> not found in <192.168.64.1> cache
?Debug : Jun 21 23:06:57 b7fdbb90 RADIUS DBA: Info for login <melkon> found. type <1>
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: Auth scheme: CHAP
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: CHAP: Using Authenticator as CHAP-Challenge
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: CHAP: Authorized user <melkon>
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: IP claimed: 0xc0a81437 (<192.168.20.55>)
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: Calling fill radius attributes for service. Attr storage size <0>
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: Calling fill radius attributes for slink. Attr storage size <0>
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: Calling fill radius attributes for NAS. Attr storage size <0>
Notice: Jun 21 23:06:57 b7fdbb90 AuthServer: Login OK <melkon> from NAS <192.168.64.1> CLID <> Calling-station <>
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: Setting interim update interval from config
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: Auth reply: RPacket:
Code: 2; ID: 14
<Vendor: 0; Attr: 6>[4]: 00000002
<Vendor: 0; Attr: 7>[4]: 00000001
<Vendor: 0; Attr: 8>[4]: c0a81437
<Vendor: 0; Attr: 9>[4]: ffffffff
<Vendor: 0; Attr: 27>[4]: 00015180
?Debug : Jun 21 23:06:57 b7fdbb90 RADIUS Packet: raw data constructed! size <50>
?Debug : Jun 21 23:06:57 b7fdbb90 RadiusSocket: Moving RADIUS packet into send queue
?Debug : Jun 21 23:06:57 b7fdbb90 RadiusSocket: RADIUS raw data sent
?Debug : Jun 21 23:06:57 b7fdbb90 AuthServer: Next...
?Trace : Jun 21 23:06:57 b7fdbb90 AuthServer: Process loop step
?Debug : Jun 21 23:06:57 b7fdbb90 RadiusSocket: Waiting for RADIUS raw data
?Debug : Jun 21 23:06:57 b5fffb90 RadiusSocket: RADIUS packet successfully received
?Debug : Jun 21 23:06:57 b75dab90 RadiusSocket: RADIUS raw data obtained
?Debug : Jun 21 23:06:57 b75dab90 RADIUS Packet: Size <166>; HDR.Size <166>
?Debug : Jun 21 23:06:57 b75dab90 AcctServer: Recv...
?Debug : Jun 21 23:06:57 b75dab90 AcctServer: Packet from <192.168.64.1> packet dump: RPacket:
Code: 4; ID: 85
<Vendor: 0; Attr: 1>[6]: 6d656c6b6f6e
<Vendor: 0; Attr: 4>[4]: c0a84001
<Vendor: 0; Attr: 5>[4]: 0000000d
<Vendor: 0; Attr: 6>[4]: 00000002
<Vendor: 0; Attr: 7>[4]: 00000001
<Vendor: 0; Attr: 8>[4]: c0a81437
<Vendor: 0; Attr: 40>[4]: 00000001
<Vendor: 0; Attr: 41>[4]: 00000000
<Vendor: 0; Attr: 44>[16]: 43304138343030313030303030303234
<Vendor: 0; Attr: 45>[4]: 00000001
<Vendor: 0; Attr: 61>[4]: 00000005
<Vendor: 0; Attr: 65>[4]: 00000001
<Vendor: 0; Attr: 66>[11]: 3137322e31302e312e3433
<Vendor: 0; Attr: 67>[10]: 3137322e31302e312e31
<Vendor: 0; Attr: 68>[5]: 3230333532
<Vendor: 0; Attr: 82>[1]: 31
<Vendor: 0; Attr: 87>[14]: 556e69712d536573732d49443133
<Vendor: 0; Attr: 91>[7]: 67746b2d677731
?Debug : Jun 21 23:06:57 b75dab90 RADIUS DBA: NAS found. Data size <0>
?Debug : Jun 21 23:06:57 b75dab90 AcctServer: Acct packet with session ID: C0A8400100000024
?Debug : Jun 21 23:06:57 b75dab90 RADIUS DBA: NAS found. Data size <0>
?Debug : Jun 21 23:06:57 b75dab90 AcctServer: Acct-Start packet
?Debug : Jun 21 23:06:57 b75dab90 AcctServer: Acct-Start: User <melkon>
?Debug : Jun 21 23:06:57 b75dab90 AcctServer: Acct-Session-Time (46) not present in accounting packet.
?Debug : Jun 21 23:06:57 b75dab90 AcctServer: No h323-setup-time (9, 25) attribute in accountig start packet. Setting to NOW <1340305617>!
?Debug : Jun 21 23:06:57 b75dab90 RADIUS DBA: Info for login <melkon> found. type <1>
?Debug : Jun 21 23:06:57 b75dab90 RADIUS DBA: info for user found. type <1> info addr <146869432>
?Debug : Jun 21 23:06:57 b75dab90 RADIUS DBA: search_user_info return info <146869432>
?Debug : Jun 21 23:06:57 b75dab90 RADIUS DBA: search_user_info return valid info
?Debug : Jun 21 23:06:57 b75dab90 RADIUS DBA: session_log_insert: service_type <2>, setting default session timeout value
?Debug : Jun 21 23:06:57 b75dab90 RADIUS IPPool: Bind <c0a81437> : <c0a81437>
?Debug : Jun 21 23:06:57 b75dab90 RADIUS DBA: Setting interim interval <0> for session id <C0A8400100000024>
?Debug : Jun 21 23:06:57 b75dab90 RADIUS DBA: Calling send_session_log_init_sync ...
?Debug : Jun 21 23:06:57 b75dab90 RADIUS Stream[plugin]: send_session_log_init_sync
?Debug : Jun 21 23:06:57 b75dab90 RADIUS Stream[plugin]: init log id <2>
?Debug : Jun 21 23:06:57 b75dab90 AcctServer: Reply packet dump: RPacket:
Code: 5; ID: 85
?Debug : Jun 21 23:06:57 b75dab90 RadiusSocket: Moving RADIUS packet into send queue
?Debug : Jun 21 23:06:57 b75dab90 RadiusSocket: RADIUS raw data sent
?Debug : Jun 21 23:06:57 b75dab90 AcctServer: Next...
?Debug : Jun 21 23:06:57 b75dab90 RadiusSocket: Waiting for RADIUS raw data
?Debug : Jun 21 23:07:21 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:07:21 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:07:51 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:07:51 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:08:21 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:08:21 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:08:51 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:08:51 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:09:21 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:09:22 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:09:51 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:09:52 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:10:21 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:10:22 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:10:51 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:10:52 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:11:21 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:11:22 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:11:51 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:11:52 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:12:03 b5efeb90 RADIUS Stream[plugin]: Account <3> with balance <1.315> credit <0.000>
?Debug : Jun 21 23:12:03 b5efeb90 RADIUS Stream[plugin]: Account <3> with balance <-2.990> credit <0.000>
?Debug : Jun 21 23:12:05 b5fffb90 RadiusSocket: RADIUS packet successfully received
?Debug : Jun 21 23:12:05 b75dab90 RadiusSocket: RADIUS raw data obtained
?Debug : Jun 21 23:12:05 b75dab90 RADIUS Packet: Size <196>; HDR.Size <196>
?Debug : Jun 21 23:12:05 b75dab90 AcctServer: Recv...
?Debug : Jun 21 23:12:05 b75dab90 AcctServer: Packet from <192.168.64.1> packet dump: RPacket:
Code: 4; ID: 86
<Vendor: 0; Attr: 1>[6]: 6d656c6b6f6e
<Vendor: 0; Attr: 4>[4]: c0a84001
<Vendor: 0; Attr: 5>[4]: 0000000d
<Vendor: 0; Attr: 6>[4]: 00000002
<Vendor: 0; Attr: 7>[4]: 00000001
<Vendor: 0; Attr: 8>[4]: c0a81437
<Vendor: 0; Attr: 40>[4]: 00000003
<Vendor: 0; Attr: 41>[4]: 00000000
<Vendor: 0; Attr: 42>[4]: 00032ed2
<Vendor: 0; Attr: 43>[4]: 0042bf02
<Vendor: 0; Attr: 44>[16]: 43304138343030313030303030303234
<Vendor: 0; Attr: 45>[4]: 00000001
<Vendor: 0; Attr: 46>[4]: 00000135
<Vendor: 0; Attr: 47>[4]: 00000ad4
<Vendor: 0; Attr: 48>[4]: 0000102d
<Vendor: 0; Attr: 61>[4]: 00000005
<Vendor: 0; Attr: 65>[4]: 00000001
<Vendor: 0; Attr: 66>[11]: 3137322e31302e312e3433
<Vendor: 0; Attr: 67>[10]: 3137322e31302e312e31
<Vendor: 0; Attr: 68>[5]: 3230333532
<Vendor: 0; Attr: 82>[1]: 31
<Vendor: 0; Attr: 87>[14]: 556e69712d536573732d49443133
<Vendor: 0; Attr: 91>[7]: 67746b2d677731
?Debug : Jun 21 23:12:05 b75dab90 RADIUS DBA: NAS found. Data size <0>
?Debug : Jun 21 23:12:05 b75dab90 AcctServer: Acct packet with session ID: C0A8400100000024
?Debug : Jun 21 23:12:05 b75dab90 RADIUS DBA: NAS found. Data size <0>
?Debug : Jun 21 23:12:05 b75dab90 AcctServer: Acct-Interim-Update packet
?Debug : Jun 21 23:12:05 b75dab90 AcctServer: Acct-Update: User <melkon>
?Debug : Jun 21 23:12:05 b75dab90 AcctServer: Updating session <C0A8400100000024> input/output octets <208594>/<4374274> session time <309>
?Debug : Jun 21 23:12:05 b75dab90 RADIUS DBA: Interim updating session <C0A8400100000024> with timestamp <1340305925>
?Debug : Jun 21 23:12:05 b75dab90 RADIUS Stream[plugin]: edit log id <2>
?Debug : Jun 21 23:12:05 b75dab90 AcctServer: Reply packet dump: RPacket:
Code: 5; ID: 86
?Debug : Jun 21 23:12:05 b75dab90 RadiusSocket: Moving RADIUS packet into send queue
?Debug : Jun 21 23:12:05 b75dab90 RadiusSocket: RADIUS raw data sent
?Debug : Jun 21 23:12:05 b75dab90 AcctServer: Next...
?Debug : Jun 21 23:12:05 b75dab90 RadiusSocket: Waiting for RADIUS raw data
?Debug : Jun 21 23:12:21 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:12:22 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:12:51 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:12:52 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:13:21 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:13:22 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:13:51 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:13:52 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:14:21 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:14:22 b5efeb90 RADIUS Stream[plugin]: Ping reply received
?Debug : Jun 21 23:14:51 b6bd9b90 RADIUS DBA: No interim update enabled session <2> found. Setting to default (if enabled).
?Debug : Jun 21 23:14:52 b5efeb90 RADIUS Stream[plugin]: Ping reply received
---------------------
##
## /netup/utm5/radius5.cfg
## UTM5 RADIUS server configuration file
##
## =============================================================================
## MAIN RADIUS SERVER PARAMETERS
## =============================================================================
## core_host
## Description: IP address of a host running the utm5_core
## Possible values: an IP address
## Required field.
core_host=127.0.0.1
## core_port
## Description: UTM5 core listening port. Equal to stream_bind_port parameter
## in utm5.cfg.
## Possible values: an integer from 1 to 65534
## Required field.
core_port=12758
## radius_login
## Description: A system user login to access the UTM5 core.
## Possible values: <string>
## Default value: radius
## radius_password
## Description: A system user password to access the UTM5 core.
## Possible values: <string>
## Default value: radius
## radius_ssl_type
## Description: SSL connection type. If 'none' is set, the connection
## is unencrypted.
## Possible values: tls1, ssl3, none
## Default value: none
#radius_ssl_type=none
## radius_acct_host
## Description: IP address of the host receiving Accounting-Requests.
## Possible values: interface IP address or 0.0.0.0
## Default value: 0.0.0.0
## radius_acct_port
## Description: Port of the host receiving Accounting-Requests.
## Possible values: an integer from 1 to 65534
## Default value: 1813
## radius_auth_host
## Description: IP address of the host receiving Access-Requests.
## Possible values: interface IP address or 0.0.0.0
## Default value: 0.0.0.0
## radius_auth_port
## Description: Port of the host receiving Access-Requests.
## Possible values: an integer from 1 to 65534
## Default value: 1812
## radius_auth_mppe
## Description: Enables MPPE 128 bit key generation used for authorization
## via MS-CHAP-v2 protocol.
## Possible values: enable
## Default value: the keys are not generated
radius_auth_mppe=enable
## radius_auth_vap
## Description: If the value is set, authorization of blocked users, whose
## logins are set in IP traffic service link, is disallowed.
## Possible values: 1
Default value: authorization is allowed
## radius_ippool_acct_timeout
## Description: A time interval during which the IP address is labeled as
## occupied after sending Access-Accept.
## Possible values: time in seconds
Default value: 30
## radius_ippool_timeout
## Description: A time interval during which the IP address is labeled as
## occupied after receiving Accounting-Start.
## Possible values: time in seconds
## Default value: The address is labeled as occupied until coming of the
## Stop packet
## radius_auth_null
## Description: If enabled, the RADIUS server authorizes requests without
## User-Password(2) attribute, if the user's password, defined in the
## service link, is empty.
## Possible values: yes, enable
## Default value: authorization without a password is not performed
radius_auth_null=yes
## radius_auth_h323_remote_address
## Description: If enabled, then telephone calls authentication is performed
## using h323-remote-address(9;23) attribute value, but not using
## User-Name(1) attribute. The attribute value is used as a login.
## Possible values: enable, on, yes
## Default value: replacement of login with h323-remote-address is not
## performed
## radius_nas_port_vpn
## Description: This parameter is checked against NAS-Port-Type(61) attribute
## value when connecting using the login specified in the IP traffic service
## link. Several values can be set.
## Possible values: a positive integer
## Default value: Checking against NAS-Port-Type for the IP traffic service
## link is not performed
## radius_nas_port_dialup
## Description: This parameter is checked against NAS-Port-Type(61) attribute
## value when connecting using the login specified in the Dial-up service
## link. Several values can be set.
## Possible values: a positive integer
## Default value: checking against NAS-Port-Type for the Dial-up service link
## is not performed
## radius_nas_port_tel
## Description: This parameter is checked against NAS-Port-Type(61) attribute
## value when connecting using the login specified in the Telephony service
## link. Several values can be set.
## Possible values: a positive integer
## Default value: checking against NAS-Port-Type for the Telephony service
## link is not performed
## radius_card_autoadd
## Description: If 'yes' is set, the automatic registration of users is
## enabled via the RADIUS server using prepaid cards. In this case in the
## Login field a user enters the card number and in the Password field - the
## PIN code. In case of the Telephony service, in the Login field it is
## entered the PIN code or its first part and the remainder is used as a
## password.
## Possible values: yes, on, enable
## Default value: automatic registration is not performed
radius_card_autoadd=1
## send_xpgk_ep_number
## Description: If this option is enabled, for the Telephony service, when a
## user is being authorized, in Access-Accept it is transmitted the
## Cisco-AVPair(9;1) attribute with the value:
## xpgk-ep-number=<a semicolon separated list of telephone numbers>.
## Possible values: <any>
## Default value: telephone numbers are not transmitted in affirmative replies
## to authorization requests
## send_h323_ivr_in
## Description: If this option is enabled, for the Telephony service, when a
## user is being authorized, in Access-Accept it is transmitted the
## Cisco-AVPair(9;1) attribute with the value: h323-ivr-in=terminal-alias:
## <a semicolon separated list of telephone numbers>.
## Possible values: <any>
## Default value: telephone numbers are not transmitted in affirmative replies
## to authorization requests
## enable_fast_telephony
## Description: This option enables the rapid mechanism for determination of
## directions and zones when rating telephone calls. In this case templates
## for telephone directions must contain the digits from 0 to 9 and the
## symbols: ^ $ + )( |.
## Possible values: enable, yes
## Default value: the default mechanism for determination of zone/direction
## is used
## h323_origin_reject
## Description: Sets zero cost for Accounting-Requests in which the
## h323-call-origin(9;26) attribute equals the value of this parameter.
## Possible values: <string>
## Default value: unset
#h323_origin_reject=originate {answer|callback|etc}
## interim_update_interval
## Description: Enables session control mechanism using Interim-Update
## packets. The value is transmitted in the Acct-Interim-Interval(85)
## attribute of the Access-Accept packet.
## Possible values: time in seconds, more than 61
## Default value: the default session closure control mechanism is used
## radius_default_session_timeout
## Description: A value of the Session-Timeout(27) attribute transmitted in
## Access-Accept for the IP traffic service link.
## Possible values: a positive integer
## Default value: 86400
## radius_callback_avpair_enable
## Description: Enables transmission of the Cisco-AVPair(9;1) attribute with
## the value lcp:callback-dialstring=<callback number>, where
## <callback number> is the part of the login from the beginning to the
## ':'-symbol.
## Possible values: <any>
## Default value: unset
## radius_acct_rewrite_login_answer
## Description: If the value of the h323-call-origin(9;26) attribute is
## 'originate', then setting this parameter enables replacing of the login
## with the value of the h323-remote-address(9;23) attribute when processing
## Accounting-Request packets.
## Possible values: enable, on, true
## Default value: unset
## radius_acct_rewrite_login_originate
## Description: If the value of the h323-call-origin(9;26) attribute is
## 'answer', then setting this parameter enables replacing of the login with
## the value of the h323-remote-address(9;23) attribute when processing
## Accounting-Request packets.
## Possible values: enable, on, true
## Default value: unset
## =============================================================================
## LOGGING (valid if logfile rotation is enabled)
## =============================================================================
## log_level
## Description: Logging level.
## Possible values: 0, 1, 2, 3
## Default value: 1
## log_file_main
## Description: Main logfile path.
## Possible values: <filename>
## Default value: STDERR
log_file_main=/netup/utm5/log/radius.log
## log_file_debug
## Description: Debug logfile path.
## Possible values: <filename>
## Default value: STDERR
log_file_debug=/netup/utm5/log/radius.log
## log_file_critical
## Description: Critical logfile path.
## Possible values: <filename>
## Default value: STDERR
## rotate_logs
## Description: Enables rotation of logfiles.
## Possible values: yes, on, enable
## Default value: rotation is disabled
## max_logfile_size
## Description: Maximum logfile size. When logfile size reaches this limit,
## a rotation is performed.
## Possible values: a size in bytes
## Default value: 10485760
## max_logfile_count
## Description: Maximum number of logfiles to retain. Valid if logfile rotation
## is on.
## Default value: not limited
## guest_pool_name
## Description: named IP pool of guest users
## Possible values: pool name
## Default value: not set
## blocked_pool_name
## Description: named IP pool of blocked users
## Possible values: pool name
## Default value: not set
## auth_unknown_users
## Description: authorize unknown users as IP pool users and assign IP address from guest_pool_name
## if it's set
## Possible values: yes, on, enable
## Default value: disabled
Re: radius cisco- не отключает клиентов
## radius_auth_vap
##Default value: authorization is allowed
вам ничего не говорит?
##Default value: authorization is allowed
вам ничего не говорит?
Re: radius cisco- не отключает клиентов
rudf писал(а):## radius_auth_vap
##Default value: authorization is allowed
вам ничего не говорит?
разобрался спасибо! теперь он не даёт подключится с 0 балансом...
возник еще вопрос ! как сделать чтоб он отбивал сесии при достижение 0 баланса?
Вам нужно создать правила фаервола для события