PPPoE + tagged vlan

[Ivan]

Пытаюсь прикрутить PPPoE к линуксу (RH8.0)
На котором соотв. интерфейсы подняты с помошью vconfig (vlan.1q)
В результете имею:

using channel 44
Using interface ppp0
Connect: ppp0 <--> /dev/pts/6
sent [LCP ConfReq id=0x1 <mru 1480> <auth pap> <magic 0xc5f49336>]
sent [LCP ConfReq id=0x1 <mru 1480> <auth pap> <magic 0xc5f49336>]
rcvd [LCP ConfReq id=0x2 <mru 1480> <magic 0x19161940> <callback CBCP>]
sent [LCP ConfRej id=0x2 <callback CBCP>]
sent [LCP ConfReq id=0x1 <mru 1480> <auth pap> <magic 0xc5f49336>]
sent [LCP ConfReq id=0x1 <mru 1480> <auth pap> <magic 0xc5f49336>]
sent [LCP ConfReq id=0x1 <mru 1480> <auth pap> <magic 0xc5f49336>]
rcvd [LCP ConfReq id=0x4 <mru 1480> <magic 0x19161940> <callback CBCP>]
sent [LCP ConfRej id=0x4 <callback CBCP>]
sent [LCP ConfReq id=0x1 <mru 1480> <auth pap> <magic 0xc5f49336>]
sent [LCP ConfReq id=0x1 <mru 1480> <auth pap> <magic 0xc5f49336>]
rcvd [LCP ConfReq id=0x6 <mru 1480> <magic 0x19161940> <callback CBCP>]
sent [LCP ConfRej id=0x6 <callback CBCP>]
sent [LCP ConfReq id=0x1 <mru 1480> <auth pap> <magic 0xc5f49336>]
sent [LCP ConfReq id=0x1 <mru 1480> <auth pap> <magic 0xc5f49336>]
sent [LCP ConfReq id=0x1 <mru 1480> <auth pap> <magic 0xc5f49336>]
rcvd [LCP TermReq id=0x8 19 16 19 40 00 3c cd 74 00 00 02 d1]
sent [LCP TermAck id=0x8]
LCP: timeout sending Config-Requests
Connection terminated.
**


Есть мысли ?

[katobr]

в исходнике ppp найти plugins/rp-pppoe/plugin.c
там вот в этом куске

Код: Выделить всё

/* Only do it if name is "ethXXX", "nasXXX", "tapXXX" or "nic-XXXX.
      In latter case strip off the "nic-" */
   /* Thanks to Russ Couturier for this fix */
   if (strlen(cmd) > 4 && !strncmp(cmd, "nic-", 4)) {
       /* Strip off "nic-" */
       cmd += 4;
   &#125; else if &#40;strlen&#40;cmd&#41; < 4
              || &#40;strncmp&#40;cmd, "eth", 3&#41; && strncmp&#40;cmd, "nas", 3&#41;
                  && strncmp&#40;cmd, "tap", 3&#41; && strncmp&#40;cmd, "br", 2&#41;&#41;&#41; &#123;
       return 0;
   &#125;

добавить vlan
пересобрать

[Ivan]

Хе. Не помогло...
Странно но у меня в строке "cmd", вместо имени интерфейса -
10.0.0.1:10.67.15.1 . IP адреса обеих сторон (по умолчанию).