UTM_5.2.1 карточки и VoIP (NEED_HELP!!!!)

Технические вопросы по UTM 5.0
Ответить
mobilesfinks
Сообщения: 14
Зарегистрирован: Пт ноя 13, 2009 13:56

UTM_5.2.1 карточки и VoIP (NEED_HELP!!!!)

Сообщение mobilesfinks »

Есть CISCO AS5300, FreeBSD7.2, GNUGK, UTM

Настроил узел согласно имеющемуся мануалу на данном сайте.
Первый момент который заставил задуматься - нужно ли на циске указывать адрес RADIUS сервера? Пока не указал, шлюз даже не производил запрос пинкода карты (это в принципе понятно исходя из других настроек циски), но мне почему то из мануала показалось, что всем рулит ГК.


Дальше возникла следующая заморочка:
Дозвонился, ввожу пинкод карты, мне отвечает, что пинкод неправильный. Лезу в админку, смотрю что карта добавилась. Смотрю в её свойствах - нет услуги. В общем разобрался как при создании карты к ним услугу прикручивать.

При вводе пинкода уже новой карты, пользователь-карта добавилась, услуга завелась, но в ответ всё же пишет, что "неправильно введен пинкод".
Да ещё карты при автодобавлени (автоактивации) в списке красными нарисованы, если изменить в них параметр "Интернет" на "включен", то карточные пользователи становятся зелеными. Тем не менее на результат ввода пинкода это не влияет.

Вот что нашёл Debug.log
Код:

Код: Выделить всё

?Debug &#58; Nov 19 12&#58;03&#58;36 Radius&#58; init_session_log id <2>
?Debug &#58; Nov 19 12&#58;03&#58;36 DBCtx&#58; <679506944> SQL query&#58; INSERT INTO tel_sessions_log&#40;account_id,slink_id,recv_date,last_update_date,             NAS_Port,Acct_Delay_Time,               Acct_Session_Id,NAS_Port_Type,User_Name,Service_Type,Framed_Protocol,NAS_IP_Address,NAS_Id,Acct_Status_Type,            Acct_Input_Packets,Acct_Input_Octets,Acct_Input_Gigawords,Acct_Output_Packets,Acct_Output_Octets,Acct_Output_Gigawords,         Acct_Session_Time,Acct_Terminate_Cause,Called_Station_Id,Calling_Station_Id,h323_remote_address,h323_conf_id,           h323_setup_time,h323_call_origin,               h323_call_type,h323_connect_time,h323_disconnect_time,h323_disconnect_cause,            h323_gw_id,zone_id,did,session_start_date&#41; VALUES&#40;'3','3','1258625016','1258625016','0','0','00000042','0','74012','1','0','50243776','192.168.254.2','1','0','0','0','0','0','0','0','0','570235','74012','','h323-conf-id=A348F4B4 D42911DE 803BAE22 418E4AC0','h323-setup-time=12\&#58;03\&#58;36.592 EET Thu Nov 19 2009','h323-call-origin=answer','h323-call-type=Telephony','','','','h323-gw-id=Router.','0','0','1258625016'&#41;
?Debug &#58; Nov 19 12&#58;03&#58;36 Radius&#58; Dynamic IP binding not called because ip or slink is null ! ip <0> slink <3>
?Debug &#58; Nov 19 12&#58;03&#58;50 UTM5 DBA&#58; DBAccess instance created
?Debug &#58; Nov 19 12&#58;03&#58;50 DBA&#58;Ctx&#58; Looking for free context
?Debug &#58; Nov 19 12&#58;03&#58;50 DBCtx&#58; <679515136> SQL query&#58; BEGIN
?Debug &#58; Nov 19 12&#58;03&#58;50 DBCtx&#58; DB transaction begin
?Debug &#58; Nov 19 12&#58;03&#58;50 DBCtx&#58; <679515136> SQL SELECT query&#58; SELECT id,pool_id,secret,balance,currency,expiration,days,is_used,service_id,is_blocked FROM card_info WHERE secret='000397717964'
?Debug &#58; Nov 19 12&#58;03&#58;50 DBCtx&#58; <679515136> SQL SELECT query&#58; SELECT value FROM utm5_settings WHERE variable='card_user_prefix'
?Debug &#58; Nov 19 12&#58;03&#58;50 DBCtx&#58; <679515136> SQL SELECT query&#58; SELECT id,pool_id,secret,balance,currency,expiration,days,is_used,service_id,is_blocked FROM card_info WHERE id='3'
?Debug &#58; Nov 19 12&#58;03&#58;50 DBCtx&#58; <679515136> SQL SELECT query&#58; SELECT pool_id,cards,cards_used,first_update,last_update FROM card_pool_info WHERE  pool_id='1'
?Debug &#58; Nov 19 12&#58;03&#58;50 DBCtx&#58; <679515136> SQL SELECT query&#58; SELECT user_id FROM card_pool_owners WHERE pool_id ='1' AND is_deleted = 0
?Debug &#58; Nov 19 12&#58;03&#58;50 DBCtx&#58; <679515136> SQL SELECT query&#58; SELECT id,pool_id,secret,balance,currency,expiration,days,is_used,service_id,is_blocked FROM card_info WHERE id='3'
 Warn  &#58; Nov 19 12&#58;03&#58;50 UTM5 DBA&#58; add_user_card_priv&#58; card <3> is already used
?Debug &#58; Nov 19 12&#58;03&#58;50 DBCtx&#58; <679515136> SQL query&#58; COMMIT
?Debug &#58; Nov 19 12&#58;03&#58;50 DBCtx&#58; DB transaction commit
?Debug &#58; Nov 19 12&#58;03&#58;50 DBA&#58;Ctx&#58; Pushing back free context
-Stats &#58; Nov 19 12&#58;03&#58;50 UTM5 DBA&#58;      Stats&#58; Uptime&#58; 00&#58;00&#58;00. Events&#58; 0; Errors&#58; 0
?Debug &#58; Nov 19 12&#58;03&#58;56 DBCtx&#58; <679506944> SQL query&#58; INSERT INTO tel_sessions_detail&#40;dhs_sess_id,disc_per_id,slink_id,recv_date,account_id,trange_id,duration,base_cost,sum_cost&#41; VALUES&#40;'10','3','3','1258625036','3','0','20','0','0'&#41;
?Debug &#58; Nov 19 12&#58;03&#58;56 UTM5 DBA&#58; DBAccess instance created
?Debug &#58; Nov 19 12&#58;03&#58;56 DBA&#58;Ctx&#58; Looking for free context
?Debug &#58; Nov 19 12&#58;03&#58;56 DBCtx&#58; <679511040> SQL query&#58; BEGIN
?Debug &#58; Nov 19 12&#58;03&#58;56 DBCtx&#58; DB transaction begin
?Debug &#58; Nov 19 12&#58;03&#58;56 UTM5 DBA&#58; discount_from_account tel zoneid <0> h.base_cost <0.000000>
?Debug &#58; Nov 19 12&#58;03&#58;56 DBCtx&#58; <679506944> SQL query&#58; UPDATE dtagg_telephony SET discounted='0.000000',discounted_without_tax='0.000000', duration='68' WHERE id='1'
?Debug &#58; Nov 19 12&#58;03&#58;56 UTM5 DBA&#58; Charge&#58;0.000000 p.u. for link&#58;3 account 3
?Debug &#58; Nov 19 12&#58;03&#58;56 DBCtx&#58; <679511040> SQL query&#58; UPDATE accounts SET balance='1' WHERE id = '3'
?Debug &#58; Nov 19 12&#58;03&#58;56 DBCtx&#58; <679511040> SQL query&#58; INSERT INTO discount_transactions_all&#40;account_id,incoming_rest,outgoing_rest,discount,discount_with_tax,service_id,service_type,slink_id,discount_date,charge_type,discount_period_id&#41; VALUES&#40;'3','1','1','0','0','1','6','3','1258625036','6','3'&#41;
?Debug &#58; Nov 19 12&#58;03&#58;56 UTM5 DBA&#58; Checking for rehash&#58; flags 3, balance 1.000 &#40;old 1.000&#41;, credit 0.000
?Debug &#58; Nov 19 12&#58;03&#58;56 DBAGiga&#58; Rehash&#58; Target&#58; 10; Action&#58; 1; Ptr&#58; bc7e8a0c
?Debug &#58; Nov 19 12&#58;03&#58;56 Radius&#58; Account '3'&#58; 1.000/0.000 send...
?Debug &#58; Nov 19 12&#58;03&#58;56 HSPlugin&#58; Rehash&#58; Target&#58; 10; Action&#58; 1; Ptr&#58; bc7e8a0c
?Debug &#58; Nov 19 12&#58;03&#58;56 BusLogic&#58; BLM&#40;37&#41; pushed &#40;comment&#58; ruh block&#41;
?Debug &#58; Nov 19 12&#58;03&#58;56 DBCtx&#58; <679511040> SQL query&#58; COMMIT
?Debug &#58; Nov 19 12&#58;03&#58;56 BusLogic&#58; try to execute 37
?Debug &#58; Nov 19 12&#58;03&#58;56 BusLogic&#58; hw_block_handler with code 37
?Debug &#58; Nov 19 12&#58;03&#58;56 BusLogic&#58; finished unknown
?Debug &#58; Nov 19 12&#58;03&#58;56 DBCtx&#58; DB transaction commit
?Debug &#58; Nov 19 12&#58;03&#58;56 DBA&#58;Ctx&#58; Pushing back free context
-Stats &#58; Nov 19 12&#58;03&#58;56 UTM5 DBA&#58;      Stats&#58; Uptime&#58; 00&#58;00&#58;00. Events&#58; 0; Errors&#58; 0
?Debug &#58; Nov 19 12&#58;03&#58;56 Radius&#58; edit_session_log id <2> input octets <0> output octet <60480>
?Debug &#58; Nov 19 12&#58;03&#58;56 Radius&#58; session log with id <2> found in the cache
?Debug &#58; Nov 19 12&#58;03&#58;56 DBCtx&#58; <679506944> SQL query&#58; UPDATE tel_sessions_log SET  account_id='3', slink_id='3', last_update_date='1258625036', Acct_Status_Type='2', Acct_Input_Packets ='0', Acct_Input_Octets ='0', Acct_Input_Gigawords ='0', Acct_Output_Packets ='252', Acct_Output_Octets ='60480', Acct_Output_Gigawords ='0', h323_connect_time='', Acct_Terminate_Cause='0', h323_disconnect_cause='h323-disconnect-cause=11', Acct_Session_Time ='20' WHERE id='10'
?Debug &#58; Nov 19 12&#58;03&#58;56 Radius&#58; id2core removing key <2>
А вот что сыпется в radius.log

Код: Выделить всё

Код&#58;
 
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS DBA&#58; NAS found. Data size <0>
?Debug &#58; Nov 19 12&#58;03&#58;36 AcctServer&#58; Acct packet with session ID&#58; 00000042
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS DBA&#58; NAS found. Data size <0>
?Debug &#58; Nov 19 12&#58;03&#58;36 AcctServer&#58; Acct-Start packet
?Debug &#58; Nov 19 12&#58;03&#58;36 AcctServer&#58; Acct-Start&#58; User <74012>
?Debug &#58; Nov 19 12&#58;03&#58;36 AcctServer&#58; Acct-Session-Time &#40;46&#41; not present in accounting packet.
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS DBA&#58; Info for login <74012> found. type <3>
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS DBA&#58; Password found for tel login&#58;74012
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS DBA&#58; info for user found. type <3> info addr <677436416>
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS DBA&#58; search_user_info return info <677436416>
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS DBA&#58; search_user_info return valid info
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS DBA&#58; Setting interim interval <0> for session id <00000042>
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS DBA&#58; TELTARIFF&#58; called number <570235> calling number <74012> direction id <0> zone id <0>
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS DBA&#58; tel.session_count incremented. value <1>
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS DBA&#58; Calling send_session_log_init_sync ...
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS Stream&#91;plugin&#93;&#58; send_session_log_init_sync
?Debug &#58; Nov 19 12&#58;03&#58;36 RADIUS Stream&#91;plugin&#93;&#58; init log id <2>
?Debug &#58; Nov 19 12&#58;03&#58;36 AcctServer&#58; Reply packet dump&#58; RPacket&#58;
Code&#58; 5; ID&#58; 99

?Debug &#58; Nov 19 12&#58;03&#58;36 RadiusSocket&#58; Moving RADIUS packet into send queue
?Debug &#58; Nov 19 12&#58;03&#58;36 RadiusSocket&#58; RADIUS raw data sent
?Debug &#58; Nov 19 12&#58;03&#58;36 AcctServer&#58; Next...
?Debug &#58; Nov 19 12&#58;03&#58;36 RadiusSocket&#58; Waiting for RADIUS raw data
?Debug &#58; Nov 19 12&#58;03&#58;49 RADIUS DBA&#58; No interim update enabled session <2> found. Setting to default &#40;if enabled&#41;.
?Debug &#58; Nov 19 12&#58;03&#58;50 RadiusSocket&#58; RADIUS packet successfully received
?Debug &#58; Nov 19 12&#58;03&#58;50 RadiusSocket&#58; RADIUS raw data obtained
?Debug &#58; Nov 19 12&#58;03&#58;50 RADIUS Packet&#58; Size <187>; HDR.Size <187>
?Debug &#58; Nov 19 12&#58;03&#58;50 AuthServer&#58; Recv...
?Debug &#58; Nov 19 12&#58;03&#58;50 AuthServer&#58; Packet from NAS <192.168.254.2>
?Debug &#58; Nov 19 12&#58;03&#58;50 RADIUS DBA&#58; NAS found. Data size <0>
?Debug &#58; Nov 19 12&#58;03&#58;50 AuthServer&#58; Packet from <192.168.254.2> packet dump&#58; RPacket&#58;
Code&#58; 1; ID&#58; 17
<Vendor&#58; 0; Attr&#58; 1>&#91;4&#93;&#58; 30303033
<Vendor&#58; 0; Attr&#58; 2>&#91;16&#93;&#58; 8c7317d63c44eb690655a9bd4819dc43
<Vendor&#58; 0; Attr&#58; 4>&#91;4&#93;&#58; c0a8fe02
<Vendor&#58; 0; Attr&#58; 5>&#91;4&#93;&#58; 00000000
<Vendor&#58; 0; Attr&#58; 6>&#91;4&#93;&#58; 00000001
<Vendor&#58; 0; Attr&#58; 31>&#91;5&#93;&#58; 3734303132
<Vendor&#58; 0; Attr&#58; 61>&#91;4&#93;&#58; 00000000
<Vendor&#58; 9; Attr&#58; 1>&#91;29&#93;&#58; 683332332d6976722d6f75743d7472616e73616374696f6e49443a3137
<Vendor&#58; 9; Attr&#58; 2>&#91;11&#93;&#58; 4953444e20303a443a3238
<Vendor&#58; 9; Attr&#58; 24>&#91;48&#93;&#58; 683332332d636f6e662d69643d4133343846344234204434323931314445203830334241453232203431384534414330
 
?Debug &#58; Nov 19 12&#58;03&#58;50 AuthServer&#58; User <0003> connecting
?Debug &#58; Nov 19 12&#58;03&#58;50 AuthServer&#58; Session for sessionid <0003> not found in <192.168.254.2> cache
 ERROR &#58; Nov 19 12&#58;03&#58;50 RADIUS DBA&#58; Can't find login <0003>
?Debug &#58; Nov 19 12&#58;03&#58;50 RADIUS DBA&#58; Searching card login <000000003>
 ERROR &#58; Nov 19 12&#58;03&#58;50 RADIUS DBA&#58; Can't find card login <000000003>
?Debug &#58; Nov 19 12&#58;03&#58;50 AuthServer&#58; Attempt to add new Card user&#58; <0003>
?Debug &#58; Nov 19 12&#58;03&#58;50 AuthServer&#58; Skiping non-digit symbols
?Debug &#58; Nov 19 12&#58;03&#58;50 RADIUS DBA&#58; Sending Auto-Add Request for Card-ID&#58; 0003
?Debug &#58; Nov 19 12&#58;03&#58;50 RADIUS Stream&#91;plugin&#93;&#58; Ping reply received
?Debug &#58; Nov 19 12&#58;03&#58;50 RADIUS Stream&#91;plugin&#93;&#58; Got User-Autoadd id <0>
?Debug &#58; Nov 19 12&#58;03&#58;50 AuthServer&#58; Got AutoAdd 0 UID from core.
 Info  &#58; Nov 19 12&#58;03&#58;51 AuthServer&#58; Retry&#58;0 to find user <0003>
 ERROR &#58; Nov 19 12&#58;03&#58;51 RADIUS DBA&#58; Can't find login <0003>
?Debug &#58; Nov 19 12&#58;03&#58;51 RADIUS DBA&#58; Searching card login <000000003>
 ERROR &#58; Nov 19 12&#58;03&#58;51 RADIUS DBA&#58; Can't find card login <000000003>
 Info  &#58; Nov 19 12&#58;03&#58;52 AuthServer&#58; Retry&#58;1 to find user <0003>
 ERROR &#58; Nov 19 12&#58;03&#58;52 RADIUS DBA&#58; Can't find login <0003>
?Debug &#58; Nov 19 12&#58;03&#58;52 RADIUS DBA&#58; Searching card login <000000003>
 ERROR &#58; Nov 19 12&#58;03&#58;52 RADIUS DBA&#58; Can't find card login <000000003>
 Info  &#58; Nov 19 12&#58;03&#58;53 AuthServer&#58; Retry&#58;2 to find user <0003>
 ERROR &#58; Nov 19 12&#58;03&#58;53 RADIUS DBA&#58; Can't find login <0003>
?Debug &#58; Nov 19 12&#58;03&#58;53 RADIUS DBA&#58; Searching card login <000000003>
 ERROR &#58; Nov 19 12&#58;03&#58;53 RADIUS DBA&#58; Can't find card login <000000003>
 Warn  &#58; Nov 19 12&#58;03&#58;53 AuthServer&#58; Errors adding card <0003>. Rehash failed
 ERROR &#58; Nov 19 12&#58;03&#58;53 AuthServer&#58; No data for User <0003> found.
?Debug &#58; Nov 19 12&#58;03&#58;53 AuthServer&#58; Auth reply&#58; RPacket&#58;
Code&#58; 3; ID&#58; 17
<Vendor&#58; 0; Attr&#58; 18>&#91;21&#93;&#58; 417574686f72697a6174696f6e206661696c65642e
<Vendor&#58; 9; Attr&#58; 103>&#91;19&#93;&#58; 683332332d72657475726e2d636f64653d2d31

?Debug &#58; Nov 19 12&#58;03&#58;53 RADIUS Packet&#58; raw data constructed! size <70>
?Debug &#58; Nov 19 12&#58;03&#58;53 RadiusSocket&#58; Moving RADIUS packet into send queue
?Debug &#58; Nov 19 12&#58;03&#58;53 RadiusSocket&#58; RADIUS raw data sent
?Debug &#58; Nov 19 12&#58;03&#58;53 AuthServer&#58; Next...
?Trace &#58; Nov 19 12&#58;03&#58;53 AuthServer&#58; Process loop step
?Debug &#58; Nov 19 12&#58;03&#58;53 RadiusSocket&#58; Waiting for RADIUS raw data
?Debug &#58; Nov 19 12&#58;03&#58;56 RadiusSocket&#58; RADIUS packet successfully received
?Debug &#58; Nov 19 12&#58;03&#58;56 RadiusSocket&#58; RADIUS raw data obtained
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS Packet&#58; Size <1142>; HDR.Size <1142>
?Debug &#58; Nov 19 12&#58;03&#58;56 AcctServer&#58; Recv...
?Debug &#58; Nov 19 12&#58;03&#58;56 AcctServer&#58; Packet from <192.168.254.2> packet dump&#58; RPacket&#58;
Code&#58; 4; ID&#58; 100
<Vendor&#58; 0; Attr&#58; 1>&#91;4&#93;&#58; 30303033
<Vendor&#58; 0; Attr&#58; 4>&#91;4&#93;&#58; c0a8fe02
<Vendor&#58; 0; Attr&#58; 5>&#91;4&#93;&#58; 00000000
<Vendor&#58; 0; Attr&#58; 6>&#91;4&#93;&#58; 00000001
<Vendor&#58; 0; Attr&#58; 30>&#91;6&#93;&#58; 353730323335
<Vendor&#58; 0; Attr&#58; 31>&#91;5&#93;&#58; 3734303132
<Vendor&#58; 0; Attr&#58; 40>&#91;4&#93;&#58; 00000002
<Vendor&#58; 0; Attr&#58; 41>&#91;4&#93;&#58; 00000000
<Vendor&#58; 0; Attr&#58; 42>&#91;4&#93;&#58; 00000000
<Vendor&#58; 0; Attr&#58; 43>&#91;4&#93;&#58; 0000ec40
<Vendor&#58; 0; Attr&#58; 44>&#91;8&#93;&#58; 3030303030303432
<Vendor&#58; 0; Attr&#58; 45>&#91;4&#93;&#58; 00000001
<Vendor&#58; 0; Attr&#58; 46>&#91;4&#93;&#58; 00000014
<Vendor&#58; 0; Attr&#58; 47>&#91;4&#93;&#58; 00000000
<Vendor&#58; 0; Attr&#58; 48>&#91;4&#93;&#58; 000000fc
<Vendor&#58; 0; Attr&#58; 61>&#91;4&#93;&#58; 00000000
<Vendor&#58; 9; Attr&#58; 1>&#91;57&#93;&#58; 683332332d696e636f6d696e672d636f6e662d69643d4133343846344234204434323931314445203830334241453232203431384534414330
<Vendor&#58; 9&#40;0&#41;; Attr&#58; 1>&#91;22&#93;&#58; 737562736372696265723d526567756c61724c696e65
<Vendor&#58; 9&#40;1&#41;; Attr&#58; 1>&#91;31&#93;&#58; 67772d7278642d63646e3d746f6e3a302c6e70693a302c233a353730323335
<Vendor&#58; 9&#40;2&#41;; Attr&#58; 1>&#91;24&#93;&#58; 63616c6c696e672d70617274792d63617465676f72793d39
<Vendor&#58; 9&#40;3&#41;; Attr&#58; 1>&#91;25&#93;&#58; 7472616e736d697373696f6e2d6d656469756d2d7265713d30
<Vendor&#58; 9&#40;4&#41;; Attr&#58; 1>&#91;27&#93;&#58; 683332332d6976722d6f75743d5461726966663a556e6b6e6f776e
<Vendor&#58; 9&#40;5&#41;; Attr&#58; 1>&#91;16&#93;&#58; 72656c656173652d736f757263653d31
<Vendor&#58; 9&#40;6&#41;; Attr&#58; 1>&#91;30&#93;&#58; 67772d7278642d63676e3d746f6e3a302c6e70693a302c233a3734303132
<Vendor&#58; 9&#40;7&#41;; Attr&#58; 1>&#91;15&#93;&#58; 636861726765642d756e6974733d30
<Vendor&#58; 9&#40;8&#41;; Attr&#58; 1>&#91;30&#93;&#58; 646973636f6e6e6563742d746578743d7573657220627573792028313729
<Vendor&#58; 9&#40;9&#41;; Attr&#58; 1>&#91;18&#93;&#58; 706565722d616464726573733d3734303132
<Vendor&#58; 9&#40;10&#41;; Attr&#58; 1>&#91;16&#93;&#58; 696e666f2d747970653d737065656368
<Vendor&#58; 9&#40;11&#41;; Attr&#58; 1>&#91;9&#93;&#58; 706565722d69643d31
<Vendor&#58; 9&#40;12&#41;; Attr&#58; 1>&#91;16&#93;&#58; 706565722d69662d696e6465783d3736
<Vendor&#58; 9&#40;13&#41;; Attr&#58; 1>&#91;19&#93;&#58; 6c6f676963616c2d69662d696e6465783d3430
<Vendor&#58; 9&#40;14&#41;; Attr&#58; 1>&#91;13&#93;&#58; 61636f6d2d6c6576656c3d3231
<Vendor&#58; 9&#40;15&#41;; Attr&#58; 1>&#91;24&#93;&#58; 636f6465722d747970652d726174653d67373131756c6177
<Vendor&#58; 9&#40;16&#41;; Attr&#58; 1>&#91;22&#93;&#58; 6e6f6973652d6c6576656c3d34323934393637323132
<Vendor&#58; 9&#40;17&#41;; Attr&#58; 1>&#91;26&#93;&#58; 766f6963652d74782d6475726174696f6e3d3131363730206d73
<Vendor&#58; 9&#40;18&#41;; Attr&#58; 1>&#91;20&#93;&#58; 74782d6475726174696f6e3d3131363730206d73
<Vendor&#58; 9; Attr&#58; 2>&#91;11&#93;&#58; 4953444e20303a443a3238
<Vendor&#58; 9; Attr&#58; 24>&#91;48&#93;&#58; 683332332d636f6e662d69643d4133343846344234204434323931314445203830334241453232203431384534414330
<Vendor&#58; 9; Attr&#58; 25>&#91;48&#93;&#58; 683332332d73657475702d74696d653d31323a30333a33362e3539322045455420546875204e6f762031392032303039
<Vendor&#58; 9; Attr&#58; 26>&#91;23&#93;&#58; 683332332d63616c6c2d6f726967696e3d616e73776572
<Vendor&#58; 9; Attr&#58; 27>&#91;24&#93;&#58; 683332332d63616c6c2d747970653d54656c6570686f6e79
<Vendor&#58; 9; Attr&#58; 28>&#91;50&#93;&#58; 683332332d636f6e6e6563742d74696d653d31323a30333a33362e3630362045455420546875204e6f762031392032303039
<Vendor&#58; 9; Attr&#58; 29>&#91;53&#93;&#58; 683332332d646973636f6e6e6563742d74696d653d31323a30333a35362e3133372045455420546875204e6f762031392032303039
<Vendor&#58; 9; Attr&#58; 30>&#91;24&#93;&#58; 683332332d646973636f6e6e6563742d63617573653d3131
<Vendor&#58; 9; Attr&#58; 31>&#91;20&#93;&#58; 683332332d766f6963652d7175616c6974793d30
<Vendor&#58; 9; Attr&#58; 33>&#91;18&#93;&#58; 683332332d67772d69643d526f757465722e
 
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS DBA&#58; NAS found. Data size <0>
?Debug &#58; Nov 19 12&#58;03&#58;56 AcctServer&#58; Acct packet with session ID&#58; 00000042
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS DBA&#58; NAS found. Data size <0>
?Debug &#58; Nov 19 12&#58;03&#58;56 AcctServer&#58; Acct-Stop packet
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS DBA&#58; Session erase ... login type <3>
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS DBA&#58; login type login_tel
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS DBA&#58; Calling tel_calculate cost. session_time_not_present <0> NOW <1258625036>
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS Tarif&#58; UT for telephony called. tkey&#58;0 start&#58;1258625016 stop&#58;1258625036
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS Tarif&#58; Telephony service <1> free time <5>
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS Tarif&#58; UT cost_info sum&#58;0.0000 setup_time <1258625016>
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS DBA&#58; VoIP Discount&#58; TR ID 0&#58; 0.000 for 20 sec setup_time <1258625016>
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS Tarif&#58; UT tkey <0> downloaded <46>
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS DBA&#58; VoIP calculated cost&#58; 0.000
?Debug &#58; Nov 19 12&#58;03&#58;56 RADIUS Stream&#91;plugin&#93;&#58; finish log id <2>
?Debug &#58; Nov 19 12&#58;03&#58;56 AcctServer&#58; Reply packet dump&#58; RPacket&#58;
Code&#58; 5; ID&#58; 100
т.е. в логе радиуса видно, что карточку № 0003 не видит в БД

про других пользователей:
для регистрации шлюза заведены 2 пользователя
1 - cisco - для регистрации его на ГейтКипере
2 - 74012 - для регистрации при звонке - иначе сыпятся ошибки, мол неизвестный логин/пароль в логах
Им обоим добавлена услуга телефонии.
Возможно у меня где то в этом косяк, но понять пока не могу. Может кто сможет подсказать более точно?
Может кто нибудь указать каких дополнительных пользователей необходимо завести и с какими услугами, что бы всё завертелось?
Вернуться к началу
mobilesfinks
Сообщения: 14
Зарегистрирован: Пт ноя 13, 2009 13:56

Сообщение mobilesfinks »

ни у кого нет мнения?
Двелоперы ткните пальцем где у меня косяк? если надо выложу конфиги кошки и другого.
Вернуться к началу
Ответить

Вернуться в «UTM 5.0»